Mechanical Faculty Members

 

 
FACULTY NAME :DR. P SHAILESH
QUALIFICATION :B.E(Mech), M.E(prod.), Ph.D(Mech)
EMAIL ID:palapartyshailesh@gmail.com
TEACHING EXPERIENCE: 17 years
PREVIOUS WORK EXPERIENCE :Professor of Mech.Engg. at Methodist College of Engineering and Technology from June 2015 to Till Date.
Professor of Mech.Engg. at St. Peters Engineering college from Aug 2012 to May 2015.

Principal & Professor of Mech.Engg. at Swathi Institute of Technology Science from Dec 2011 to July 2012. (Affiliated to Osmania University

Principal Professor at N.R.E.C from June 2011 to Dec 2011 (Ratified by J.N.T.U.H)

Principal & Professor at Sri.Sai.Jyothi from June 2009 to May 2011.
(Ratified by J.N.T.U.H)

Principal at G.I.E.T. from November 2008 to May 2009

Professor at N.C.E.T in Mech. Engg. from January 2007 and
Principal from June 2007 to Oct. 2008

Workshop Superintendent (Associate Professor) at Deccan College of Engineering from January, 2006 December 2006.

Associate Professor at VNR VJIET from June 2005 to December 2005.

Associate Professor at GNEC from December 2004 to June 2005.

Lecturer at N.C.E.T from September 2001 to November 2004
- Visiting Faculty at University College of Technology from August
1998 to August 2001.

Faculty at MVSR Engineering College from June 1997 to July 1998.

Faculty at Deccan College of Engineering and Technology from
June 1996 to July 1997.
Education Information: I) Completed Ph.D on “Studies on centrifugal casting of alliuminium alloys” in April 2005 at Osmania University
(OU), Hyderabad.

II) M.E. in Mechanical engineering with specialization of production at Osmania University
(OU), Hyderabad.

III) B.E in Mechanical engineering at Osmania University
(OU), Hyderabad. .
Area of Specialization:Manufacturing, composite materials
Subject Handled:I) Production technology

II) Manufacturing process

III) product design and process planning

IV) non traditional machining methods

V) Finite element analysis
Research Publications: Research
– Carried out project of Approx.Rs 1 Lakh on “Centrifugal Casting of Al-Alloys” from Indian Institute of Foundry Man, Kolkata.Dr.M.komaraiah Principal investigator professor of Mechanical Engineering Osmania University Dr.P.shailesh co-investigator.
– Completed Sponsored Project of Approx. Rs 9.97 Lakhs from Research Center Imarat (RCI) on “Modeling & Analysis of Quartz Sensor” DRDL, Hyderabad Dr.P.shailesh principal investigator SPEC Hyderabad
– Project applied and in process of Approx.Rs 9. Lakhs from Directorate of Engineering on “Minimization of Porosity in Cast Al. Alloys using Ultrasonic Degassing Technique for Defense Applications”, DRDL, Hyderabad
– Project on simulation modeling to minimize porosity level in aluminium casting by using ultrasonic stir cating from L&N structural PVT.LTD
1.DR.N.suresh kumar reddy Principal investigator, BITS pilani Hyderabad campus
2.Dr.P.shailesh co-investigator MCET Hyderabad
International Journal
● P. Shailesh1*, S.Sundarrajan2 , M.Komaraiah3 Optimization of process parameters of Al-Si alloy by centrifugal casting technique using Taguchi design of experiments “ Procedia Material Science” Elsevier Journal- May 2014
● P.Shaliesh Ȧ*, B. Praveen Kumar, K Vijaya Kumar and A Nagendra Determination of the Solidification Time of Al-7%Si Alloy during Centrifugal Casting, International Journal of Current Engineering and Technology , Special Issue, Vol. 2,Feb 2014 PP226-229
● Shailesh P, K Kantha Rao & K Vijay Kumar, Delamination Studies in Fiber Reinforced Polymer Composites ,International Journal of Engineering Science and Innovative Technology ISSN: 2319-5967 pp 264-274 July 2013
● Shailesh P, Praveen Kumar, Sundarrajan.S & Komaraiah.M Experimental Investigation on Centrifugal Casting of 5500 alloy - a Taguchi Approach scientific research and essays. Academic Journals, 2012 Vol(7) 44,pp 3797-3808
● Shailesh P, kumar. A and Sundarrajan S, Effect of magnetic arc oscillation on mechanical properties of AA 5456 Aluminum alloy weldments, Materials and Design, Elesvier 2008 Vol. 29 Pp 1904-1913

● BSV Ramarao, P Sailesh, M Sreenivasarao, “Various Research Trends of Electrical Discharge Machining (EDM)– A Review”, International Journal of Emerging Research in Management &Technology, pp76-84, ISSN: 2278-9359 (Volume-4, Issue-12)
● B.Ramakrishna and P.Shailesh, “Parametric and Performance Analysis of Water – Cooled Surface Condenser”, Journal of mechanical engineering, 2016.
National Journal
– Shailesh P, Sundarrajan S and Komaraiah M, “Selection of process parameters for mechanical properties of Aluminium alloys by centrifugal casting using Taguchi method approach”, Published in Indian Foundry Journal. March, 2005, Vol.51, pp.25-32.
– Shailesh P, Sundarrajan S, Komaraiah M and Kumar, “Studies on mechanical properties of centrifugally cast Aluminium alloy using Taguchi method”, Published in Journal Aerospace Quality and Reliability (Defence Journal), July 2005, Vol.2, pp.49-59.



Books Published
– Metallurgy and Materials Science for B.E. Students

Contributory Book chapters
– Objective questions and answers on Mechanical and Chemical Engineering for B.E. students.
– Metallurgy and Materials Science for B.E. Students
Workshops/Seminars Attended

- Attended International Conference on “Advanced Materials Characterization, at GRIET Hyderabad- Mar.2014
– Paper presented on “Evaluation of process parameters for mechanical properties of Aluminium alloys by centrifugal casting using Taguchi method” at International Foundry Congress in Hi-TEX, Hyderabad in the year February, 2004.
– Paper presented on “Evaluation of process parameters for controlling porosity of cast Aluminium alloy by using Taguchi method” at International Foundry Congress at Kolkatta, in the year February, 2000.
– Shailesh P, Sundarrajan S and Komaraiah M, “Effect of process variables for mechanical properties of Aluminium alloys by centrifugal casting using Taguchi method approach”, “Trends in Mechanical Engineering” held in December 2004, pp.43-47.at VCE Hyderabad.
– BSV Ramarao, P Sailesh, M Sreenivasarao, “A Review On Research Trends In Electrical Discharge Machining Process”, at International Conference on Emerging Trends in Mechanical Sciences (ICEMS-2015), pp 305-309, ISBN: 978-93-83038-28-2.
– P Shailesh , J .babu, K. Vijay Kumar , k.Srinivasa Raghavan, “Evaluation of Strain and Strain rates at different stages of Super plastic Cone Forming”, at 5th International Conference of Materials Processing and Characterization (ICMPC 2016).
– Kareddula Vijaya Kumar, P Shailesh, J A Ranga babu, Ravi Kumar Puli, “Preparation and Characterization of GFRPC Material”, at 5th International Conference of Materials Processing and Characterization (ICMPC 2016).
– Kareddula Vijaya Kumar, Puli Ravi Kumar, A Swarna Kumari and P Shailesh, “Performance and Emission Studies of a SI engine using Distilled Plastic Pyrolysis Oil-Petrol blends”, at 3rd International Conference on Mechanical, Electronics and Computer Engineering (CMECE 2016)New York, January 7-9, 2016.
– B.Ramakrishna and P.Shailesh “A Review on Performance Analysis of Water – Cooled Surface Condenser under Various Atmospheric Conditions”, at 1st international conference on paradigms in Engineering & Technology (ICPET-2016), Hyderabad, March 2-3, 2016.
– Guiding Two PhD students
– EDM Machining Characteristics of Ti. Alloys and INCONEL 690 Alloy
– Ultrasonic Degassing

 
Faculty name:Mr. R.V PRASAD
Qualification:B.Tech(M.E), M.Tech(M.E)
E-mail Id :rvprasad@methodist.edu.in
Teaching Experience:29 years
Previous working Experience:• Worked as Professor in the Dept of Mech Engg in MLR INST OF TECH & MGMT from 01/06/13
Responsible for teaching & allied duties,.

• Worked as Professor in Mech Engg Dept in GURUNANAK INST OF TECH from 14/11/12 to 31/05/13.
Responsible for teaching & allied duties, Officer I/C for EXAM BRANCH, DEPUTY PRESIDING OFFICER FOR GATE13 EXAM(10/02/13).

• Worked as Professor in the Dept of Mech Engg & Vice Principal of VITS Group of Engg colleges from 29/06/2012 to 31/10/12.
Responsible for teaching and allied duties & college Administration.

• Worked as professor in the Dept of Mech Engg in GODAVARI INST OF ENGG & TECH (NBA Accredited) from 20/07/ 2010 to 16/06/12.
Responsible for teaching and allied duties both at UG and PG level. Took the Additional Charge at the college level as HEAD- ACADEMIC CELL responsible for Regularity of class work, Monthly Consolidated Attendance Statements, Monitoring of Syllabus, Counseling of the Students, Parent Appraisals, Conduction of Mid Exams, and Academic Audit of the Records at the end of Semester.

• Worked as Professor & Head of the Mech & Civil Engg in SV Group of Inst (SVCET& SVIET) from 06/01/10 to 17/07/10.
Carried out the responsibilities of the dept administration & setting up of laboratories in AERO, CIVIL & MECH DEPTS.

• Worked as Professor & Head of the Dept. in GURUNANAK ENGG COLLEGE (NBA Accredited) from 07/07/2007 to 05/01/10.
Responsible for Dept Administration & teaching at both UG and PG level.

• Worked in NIZAM INST OF ENGG & TECH (NIET), Deshmukhi, Hyderabad, as an Assoc. Professor & Head of the Dept. in Mech. Engg. Dept. from 01/10/2002 to 05/07/2007.
Responsible for dept administration & Establishing all the labs in the department from the inception with state of art of the equipment

• Worked in DECCAN COLLEGE OF ENGG & TECH (DCET), Nampally (Abids), Hyderabad, as an Asst. Professor from 27/10/ 2000 to 30/09/2002.

• Worked in AURORA’s ENGG COLLEGEBhongir, as a Lecturer in Mech. Engg. Dept. from 21/11/98 to 30/09/2000.

• Worked in TGL GOPALSETTY POLYTECHNIC, Adoni as a Lecturer in Mech. Engg. Dept. from 08/10/1990 to 31/10/1998.

Education Information:Passed ME with Production Engineering Specialization from University College of Engineering Osmania University in First Division.

Passed BE (Mech) in First Division from Gulbarga University.

Area of Specialization:production
Subject Handled:Engineering Mechanics, Strength of Materials, Machine Design ,
Finite Elements Methods, Fluid Mechanics & Hydraulic Machinery,
Thermodynamics, Thermal Engineering, Refrigeration & Air Conditioning, Heat Transfer, Control Systems, Metrology & Instrumentation,
Automation, Product Design & Process Planning,
Manufacturing Technology, Machine Tool Engineering


Research Publications:• Published a paper titled SIMULATION OF CRITICAL CRACK LENGTH PROPAGATION USING FRACTURE MECHANICS in IJCER (ISSN2250-3005) VOL4,APR’16
• Published a paper titled “LAGRANGIAN MODEL FOR SIMULATING TURBULENT DISPERSION AND AGGLOMERATION OF DROPLETS WITH IN A SPRAY ” in IJATES (ISSN 2348-7550) VOL 02/ISSUE 11/ NOV’2014
• Published a paper titled”MODELING AND EXPERIMENTAL VALIDATION OF COMBUSTION IN DI DIESEL ENGINE THROUGH CFD SIMULATION” in IJTES (ISSN 2320- 8007) VOL 2(11),pp 2550-2552 NOV’ 2014.

• Published a paper titled “EVALUATION OF MECHANICAL PROPERTIES OF COCONUT COIR/BAMBOO FIBRE REINFORCED POLYMER MATRIX COMPOSITES” in IJMMSE(ISSN2278-2524) REF:IJMMSEOCT2013
• Published a paper titled “ FSW OF PPL REINFORCED WITH NANOSIZED COMPOSITES, EFFECTS ON MECH&MICROSTRUCTURAL PROPERTIES ” in IJERA (ISSN; 2248-9622 VOL 2 ISSUE 6 NOV/DEC 12 pp288-296)
• Published a paper titled on “ MICROSTRUCTURE& MECH PROPERTIES OF FRICTION STIR WELDED DISSIMILAR ALUMINIUM ALLOYS ” in IJSRP (IOSR JMCE) ISSN 2253153 VOL 2 NOV/DEC12
• Published a paper titled “EXPERIMENTAL INVESTIGATION OF DRILLING PARAMETERS ON COMPOSITE MATERIAL” in IJSRP Journal ISSN2278-1684 VOL2 ISSUE3 OCT12
CONFERENCES:
• Presented a paper titled SIMULATION OF CRITICAL CRACK LENGTH PROPAGATION USING FRACTURE MECHANICS in PARADIGMS IN ENGG & TECH (ICPET2016)

• Presented a paper titled “ MECHANICAL EVALUATION WITH FE ANALYSIS OF SANDWICH PANELS FOR WIND TURBINE BLADE” in WEMEP-2012(INDO DANISH INT CONF) at BITS-PILANI HYD CAMPUS on 22 & 23 NOV’12

• Presented a paper titled “ NANO FLUIDS:AN EFFECTIVE COOLANT IN AUTOMOTIVE APPLICATIONS” in NANOCON -12(INT CONF) at BHARATI VIDYA PEETH UNIV COLLEGE OF ENGG PUNE on 18&19 OCT’2012

• Presented a paper titled “FRICTION STIR WELDING OF POLYPROPYLENE REINFORCED WITH AL2O3 NANO COMPOSITES, EFFECT ON MECHANICAL & MICROSTRUCTURAL PROPERTIES” in NCONSEA 2012 at CENTER FOR NANOSCIENCE AND TECHNOLOGY, IST, JNTU, HYD on 27th & 28th April 2012.

• Presented a paper titled “EVALUATION OF MATRIX FACTORISATION TECHNIQUES FOR CELL FORMATION IN MANUFACTURING” in RAME 2012 at OUCOE, HYD on 16th & 17th March 2012.

• Presented a paper titled “Artificial Intelligence Techniques in SOLIDIFICATION SIMULATION” at SCAD COLLEGE OF ENGINEERING & TECHNOLOGY in NCRTCT- 09 at Tirunevel, Tamilnadu on 3rd April, 2009.

• Presented a paper titled soft computing techniques in “SOLIDIFICATION SIMULATION OF CASTING USING SOFT COMPUTING METHODOLOGIES” in NC on SOFTCOMPUTING at INSTITUTE OF ROAD AND TRANSPORT, Erode, Tamilnadu, on 18th March, 2009



WORKSHOPS/SEMINARS ATTENDED• Participated in 3-day “ENTREPRENEURSHIP AWARENESS PROGRAMME (EAP)” in collaboration with NITTTR, CHENNAI from15th NOV to17th NOV2009 at SVCOE & T , CHITTOR
• Participated in 2-day Workshop on “EFFECTIVE TEACHING METHODOLOGY” 3- 4 DEC’2007 Organized by ISTE .

• Participated in “COMPUTER AIDED MANUFACTURING (CADEM)” 2- day workshop 16th and 17th Sep 2005 conducted by JNTU & CADEM Technologies Pvt. Ltd., Bangalore.

• Participated in “VIRTUAL CASTING SOFTWARE” training programme conducted from 26/08/04 to 27/08/04 by R&D centre of The Indian Institute of Foundry men (IIF).

• Participated in “REFRESHER COURSE IN ENERGY CONSERVATION AND MANAGEMENT” from 24-02-03 to 15-03-03, conducted by JNTU-UGC at Academic Staff College.
 
FACULTY NAME :DR.U S VARAPRASAD
QUALIFICATION :B.Sc,B.Sc(Engg),M.Tech,Ph.D
EMAIL ID:prasad.usv@gmail.com
TEACHING EXPERIENCE:16 years
PREVIOUS WORK EXPERIENCE :Teaching :

 Worked as Professor & HOD in Mechanical Engg. Dept. at Mahaveer Institute of Science &Technology,Hyderabad from 2005 to 2013.(4 years as professor and 4 years as HOD)

 Farah College Engg. as HOD Mech & Lords Institute of Technology Hyderabad as associate professor under the same management for 1½ years. Holy Mary Institute of Technology and Science, Bogaram, Hyderabad as Asst.professor for one year. GMR Institute of Technology, Rajam, Srikakulam Dist. as Asst. Professor for one year .
Industrial R & D :

 Videocon Appliances ltd. Aurangabad, as Asst.General Manager( Design and Development) for 4 years (1997 to 2001) in the field of Design and Development of Refrigeration equipment and other appliances.

 Hyderabad Allwyn Ltd. As Senior Manager R & D for a period of 19 years (1978 to 1997) in the field of R&D of Refrigeration and AC equipment , Furniture and allied equipment. Well acquainted with drawings, production and quality control aspects.

 Central Labour Inst. Mumbai (Govt. of India), as Research officer Engg.(for a period of 2 years 1975 to 1977) in the field of consultancy and factory advisory service.

 Frick India ltd. Faridabad, Haryana for a period of 3½ years (1972 to 1975) in the field of Design and Development of Refrigeration and AC equipments like cold storages and ice plants.
Education Information:
 Ph.D.( N I T ,Warangal.) ,2013

 M. Tech ( Heat power , I.I.T Kharagpur ,1972.)

 B. Sc, Engg Mechanical, Sambalpur University, Orissa, 1969.

 B.Sc., Utkal University, Orissa, 1965.

 Diploma in Business Management, Institute of Public Enterprise, Hyderabad 1985
Area of Specialization:Thermal Engg.,I.C Engines,Bio- Diesel,RAC
Subject Handled:Automobile Engg, Engineering drawing/ Engineering Graphics, Machine Drawing,
Production Drawing practice, Fluid mechanics and HydraulicMachines,
Thermodynamics, Thermal Engg, Production Technology, Management science, MEFA, Refrigeration & Air conditioning, Heat transfer, Thermal Turbo Machines,Power Plant Engg.etc.
Research Publications: International Journals:


1. USV Prasad, K. Madhu Murthy and G. Amba Prasad Rao EFFECTIVE UTILIZATION OF B20 BLEND WITH OXYGENATED ADDITIVES THERMAL SCIENCE, Year 2011, Vol. 15, No. 4, pp. 1175-1184.

2. U. S. V. Prasad, K. Madhu Murthy and G. Amba Prasad Rao NOX REDUCTION STRATEGIES FOR A B40 FUELLED DIRECT INJECTION DIESEL ENGINE International Journal of Mechanical Engineering January-June 2012 • Volume 5 • Issue 1

3. U. S. Vara Prasad, K. Madhu Murthy, G. Amba Prasad Rao EFFECTIVE REDUCTION OF EMISSIONS OF A DI DIESEL ENGINE FUELLED WITH BIODIESEL AND DIESEL BLENDS WITH OXYGENATED ADDITIVES Journal of Alternate Energy Sources & Technologies, STM Journals Volume 3, Issue 2, August 2012, Pages 1-10

International Conferences:

1. G.Amba Prasad Rao, K.Madhu Murthy and USV Prasad INFLUENCE OF FUEL INJECTION PARAMETERS OF DI DIESEL ENGINE FUELLED WITH BIODIESEL AND DIESEL BLENDS International Conference on Mechanical, Automobile and Robotics Engineering(ICMAR 2011) Penang, Malaysia, 11-12 Feb.2012.

2. G.Amba Prasad Rao, K.Madhu Murthy and USV Prasad EFFECT OF OXYGENATED ADDITIVES ON CONTROL OF EMISSIONS IN A DI DIESEL ENGINE USING BIODIESEL-DIESEL BLENDS International Conference on Computer, Electrical, Electronics & Mechanical Engineering (ICEEME'2012) Penang,Malaysia,11-12 Feb.2012

3. USV Prasad, K. Madhu Murthy and G. Amba Prasad Rao EFFECT OF ETHANOL AND DIETHYL ETHER AS ADDITIVES FOR IMPROVING PERFORMANCE OF ENGINE WITH BIODIESEL -DIESEL BLENDS Proceedings of International Conference on Advances in Energy Research(ICAER 2011),IIT Mumbai,

4. USV Prasad, K. Madhu Murthy and G. Amba Prasad Rao PERFORMANCE IMPROVEMENT OF BIODIESEL BLENDS WITH OXYGENATES International Conference on Futuristic Trends in Materials & Energy Systems FTME-2011, Dec 29-30,2011.

National Conferences:

1. USV Prasad, K. Madhu Murthy and G. Amba Prasad Rao HEAT TRANSFER MODELS OF IC ENGINES-A REVIEW has been published in the proceedings of Trends in Mechanical Engineering, TIME 2010 organized by KITS Warangal on 30th Dec.2010.

2. USV Prasad, K. Madhu Murthy and G. Amba Prasad Rao PERFORMANCE IMPROVEMENT OF DIRECT INJECTION DIESEL ENGINE WITH OXYGENATED BIO-DIESEL BLENDS National Conference on Interface between Chemical Sciences and Technologies, NIT Warangal, Dec 29-30,2011.
Training courses/Conferences/Seminar/Workshop Workshop Conducted

i. Conducted I.C Engine workshop at Methodist Engineering College

ii. Conducted RAC workshop at Methodist Engineering College
FDP
Attended “Innovative Teaching Strategies” by MBA dept, MCET, 21-12-2013
Training
G.O.I training 22.9.69 to 5.8.70 in Heavy earth moving machinery.

Refresher Courses

i. Attended “Industrial Experimentation” by Indian Society for quality & Reliability 5-11-84 to 31-12-84

ii. Attended “Technical & Scientific Reporting” Course at Engineering Staff college of India (Institute of Engineers), Hyderabad – 6th to 8th June 1988

iii. Attended Company Standardization Training Seminar by Bureau of Indian Standards, New Delhi, 2-8-88

iv. ‘Diploma in Business Management” conferred on 24-12-85 by I.P.E Hyderabad

Conferences Attended

i. Agrimach ’89 – Agricultural Machinery Exhibition & Symposium, ESCAP/UNDP Network, Bangkok, Thailand 16th-19th Feb 1989.

ii. International Conference on I.C. engines & Combustion at J.N.T.U(H) “ICONICE”-2007, 6-9th Dec-2007

iii. Technomist’ – Conference of Mahaveer College of Engineering and Technology

iv. ‘Forste Fiesta’– Conference at Methodist College of Engineering

v. ‘Metheric Utstav’ - Conference at Methodist College of Engineering
Workshop Attended
‘Ozone depleting substances phase out’ workshop at small industries service Institute, Hyderabad, 24-1-1997 30
Workshops/Seminars AttendedTraining courses/Conferences/Seminar/Workshop Workshop Conducted

i. Conducted I.C Engine workshop at Methodist Engineering College

ii. Conducted RAC workshop at Methodist Engineering College
FDP
Attended “Innovative Teaching Strategies” by MBA dept, MCET, 21-12-2013
Training
G.O.I training 22.9.69 to 5.8.70 in Heavy earth moving machinery.

Refresher Courses

i. Attended “Industrial Experimentation” by Indian Society for quality & Reliability 5-11-84 to 31-12-84

ii. Attended “Technical & Scientific Reporting” Course at Engineering Staff college of India (Institute of Engineers), Hyderabad – 6th to 8th June 1988

iii. Attended Company Standardization Training Seminar by Bureau of Indian Standards, New Delhi, 2-8-88

iv. ‘Diploma in Business Management” conferred on 24-12-85 by I.P.E Hyderabad

Conferences Attended

i. Agrimach ’89 – Agricultural Machinery Exhibition & Symposium, ESCAP/UNDP Network, Bangkok, Thailand 16th-19th Feb 1989.

ii. International Conference on I.C. engines & Combustion at J.N.T.U(H) “ICONICE”-2007, 6-9th Dec-2007

iii. Technomist’ – Conference of Mahaveer College of Engineering and Technology

iv. ‘Forste Fiesta’– Conference at Methodist College of Engineering

v. ‘Metheric Utstav’ - Conference at Methodist College of Engineering
Workshop Attended
‘Ozone depleting substances phase out’ workshop at small industries service Institute, Hyderabad, 24-1-1997 30
 
FACULTY NAME :MD.FAKHRUDDIN H.N.
QUALIFICATION :B.E.(Mechanical),M.Tech.(R&A/C),(P.hd)-Internal Combustion Engine,JNTUniversity_Hyderabad
EMAIL ID:mfhnn@yahoo.com
TEACHING EXPERIENCE:21 years
PREVIOUS WORK EXPERIENCE : Industrial Experience

1 year in Reliance Fire and Safety Equipments - Hyderabad as Installation & Maintenance Engineer.

2 years in Al – Zahran Company – K.S.A. as Maintenance Engineer in (C.U.S.C.) central utility service complex, King Saud University – Riyadh.

2 years in S.S.E.M. Company - K.S.A. as Maintenance Engineer in Rashed Mall.

Teaching Experience

5 years in Mannan Institute of Science and Technology - Chevella, In Mechanical Engineering Department as Assistant professor.

5 year in G.F. Engineering College - Bandlaguda, Hyderabad. In Mechanical Engineering Department as Professor.
Education Information: I) Waiting for collegium RMM#1 and RMM#2 is completed, experimental work is done for for the performance of internal conbustion engine using bio-diesel

II) M.Tech.in Refregeration and Air-Conditioning at Jawaharlal Nehru Technical University (JNTU), Anantapu.

III) B.E. is done in the core branch of Mechanical Engineeering at Gulbarga University in the Karnataka district of Gulbarga
Area of Specialization:Internal Comustion Engine
Subject Handled:Engineering Thermodynamics
Thermal Engineering
Heat Transfer
Refrigeration and Air Conditioning
Automobile Engineering
Power Plant Engineering
Production Technology
Machine tools
CAD / CAM
Dynamics of Machine
Metrology & Surface Engineering
Design of Machine Members
Kinematic of Machine
Engineering Drawing
Nano Technology
Finite Elements Methods
Fluid Mechanics & Hydraulic Machines
Non Conventional Sources of Energy
Fuels and Combustion
Elements of Mechanical Engineering
Research Publications: RESEARCH ATIVITIES

 PUBLICATION INTERNATIONAL JOURNAL

1. Md. Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. “Decentralize Energy System for Rural India – A Future Option”. International Journal of Integrated Energy Systems (IJIES), ISSN: 0975-2978, Volume 1 Number 2, PP 153-162, July-December 2009.

2. Md. Fakhruddin Hasan Nizami, Srinivas Ragahavan, Dr. M.Yousuf Ali, Dr. Manzoor Hussain “Modified CI Engine Performance by Varying Injection Timing”. International Journal for Trends in Engineering & Technology (IJTET), ISSN: 2349-9303, Volume 7 Issue 1 – July 2015.

3. Md. Fakhruddin Hasan Nizami, Dr. M.Y. Ali, Dr. Manzoor Hussain M, Srinivas Raghavan “Performance of CI Engine with & without Swirl in Crown of the Piston with Varying Injection Pressure & Timing”. NIET Journal of Engineering & Technology (NIETJET), ISSN: 2229-5828 Volume Issue – 2015.

4. Md. Fakhruddin Hasan Nizami, Dr. Mohammed Yousuf Ali, A.P.V.Prasad Rao “4 Stroke Engine with 2 Power Strokes”. Journal of Basic and Applied Engineering Research (JBAER) p-ISSN: 2350 – 0077, e-ISSN: 2350 – 0255.Volume 2 Issue 18 September 2015.

5. Md. Fakhruddin Hasan Nizami, Dr. M.Manzoor Hussain, Mohammed Adnan Ahmed “Exhaust Gas Emission Analysis for Variable Injection Pressure 1-Cylender Engine for 2 Different Feedstock Biodiesel Blended in Diesel”. International Journal of Latest Trends In Engineering and Technology e-ISSN: 2278-621X p-ISSN: 2319-3778 Pages : 263-269. Volume 7 Issue 1 May 2016.

 PAPER PRESENTATION_INTERNATIONAL CONFERENCE

 Md. Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Soma Kumari “Air Conditioning System_Criteria for Green Building”. International Conference on Recent Advances in Mechanical Engineering_INCRAME’12. 19th & 20th April 2012 at Dr. MGR Educational & Research Institute University, Adayalampattu, Chennai Tamil Nadu.

 Md. Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Srinivas Raghavan “Performance of CI Engine with & without Swirl in Crown of the Piston with Varying Injection Pressure & Timing”. An International Conference & Exhibition on Cutting Edge Technological Challenges in Mechanical Engineering _CETCME-2015. In association with ISTE, Delhi and UPTU, Lucknow on 21st & 22nd March 2015, Organized by the Department of Mechanical Engineering, Noida Institute of Engineering and Technology, Greater Noida.


 Md. Fakhruddin Hasan Nizami, M.Y. Ali, Pradeep Kumar. “Modified CI Engien Performance by Varying Injection Timing”. International Conference on Advance Research in Technology and Engineering – ICARTE’15 held at Ranganthar Institute of Engineering & Technology Athipalayam Coimbatore – 641110 on 31st March 2015.

 Md. Fakhruddin Hasan Nizami, Dr. Mohammed Yousuf Ali, A.P.V.Prasad Rao “4 Stroke Engine with 2 Power Strokes”. 2nd International Conference on Innovative Research in “Mechanical, Electrical, Electronics, Civil, Computer Science and Information Technology” (MECIT-2015) Organized by “Krishi Sanskriti” at Jawaharlal Nehru University, New Delhi-110067on 22nd and 23rd August, 2015.

 Md. Fakhruddin Hasan Nizami, Srinivas Raghavan, M.Y. Ali, Dr. Manzoor Hussain “Waste cooking oil as feedstock to produce biodiesel & Saponification reaction as by product” International Conference on Trend Setting Innovations in Chemical Sciences & Technology – Application in Pharma Industry (TSCST-APT), Under TEQIP – II @ Institute of Science & Technology JNTUH, Hyderabad 16th – 18th December 2015.

 Mohd. Haseeb Ullah Khan, Md. Fakhruddin Hasan Nizami “Phenomenon of Gravitational Waves Reaching the Earth Surface due to Black holes in Space” International conference on Paradigms in Engineering & Technology (ICPET 2016) in association with Indian Society for Technical Education, ISTE-Delhi & the world academy of research in science and engineering (WARSE) organized by Methodist College of Engineering & Technology, Abids Hyderabad Telangana State India, on 2nd & 3rd March 2016.

 A.P.V.Prasad Rao, K.Sundeep Kumar, R.Charan nayak Md.Fakhruddin H.N. “Modification of IC Engine to Solar Powered Compressed Air Engine” International conference on Paradigms in Engineering & Technology (ICPET 2016) in association with Indian Society for Technical Education, ISTE-Delhi & the world academy of research in science and engineering (WARSE) organized by Methodist College of Engineering & Technology, Abids Hyderabad Telangana State India, on 2nd & 3rd March 2016.

 Md. Fakhruddin H.N, Md. Samiuddin Siddiqui, Dr. Mohammed Yousuf Ali, Dr.Manzoor Hussain “Experiment on Single Cylinder CI Engine with Various Proportion of WCOBD in Diesel” International conference on Paradigms in Engineering & Technology (ICPET 2016) in association with Indian Society for Technical Education, ISTE-Delhi & the world academy of research in science and engineering (WARSE) organized by Methodist College of Engineering & Technology, Abids Hyderabad Telangana State India, on 2nd & 3rd March 2016.


 PAPER PRESENTATION_NATIONAL CONFERENCE

1. Md. Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. “Decentralize Energy System for Rural India _A Future Option”. National Conference on “Energy Security for Rural Development – ESRD 2009”, 26th March 2009. Sponsored by Ministry of New and Renewable Energy (MNRE) Govt. of India & University Grand Commission (UGC). Organized by Rural Energy Centre Gandhigram rural Institute – Deemed University, Gandhigram, Dindigul 624 302, Tamilnadu.

2. Md. Fakhruddin Hasan Nizami “Hydrogen Generation” two days National Conference, Sanketika 2K11, 17th & 18th March 2011. Organized by Lords Institute of Engineering & Technology, ISO: 9001-2008 Certified, Himayathsagar, Hyderabad-500008.
WORKSHOPS/SEMINARS ATTENDED :WORKSHOP PARTICIPATION

Faculty Development Program on “Innovative Teaching Strategies” Organized by the Development of Business Management, Conducted by Methodist College of Engineering & Technology, Abids Hyderabad on 21st December 2013.

 2-week ISTE Workshop on “Engineering Thermodynamics” under the National Mission on Education through ICT(MHRD, Govt. of India) 11th to 21th Dec. 2012 Conducted by IIT Bombay. At remote center MJCET, Banjara hills Rd. No.-3_Hyderabad

 2-week ISTE Workshop on “Computational Fluid Dynamics” under the National Mission on Education through ICT(MHRD, Govt. of India) 12th to 22th June, 2012 Conducted by IIT Bombay. At remote center MJCET, Banjara hills Rd. No.-3_Hyderabad

 Course work on “Research Methodology”, 06th to 11th June 2011. Organised by Research & Development Cell, Sponsored by JNT University, Kukatpally Hyderabad – 85.

 QIP Workshop of Short Term Training Programme on “Time Series Modeling & Spectral Analysis-Theory & Application”, July 12-17, 2010 Sponsored by AICTE, New Delhi. Organized by the Department of Chemical Engineering IIT_Madras

 National Workshop on “Hydrogen & Fuel Cell Technologies for Future Energy Options”, 22nd & 23rd December 2008. TEQIP Sponsored Event, Organized by CENTRE FOR ENVIRONMENT, Institute of Science and Technology, Jawaharlal Nehru Technological University Hyderabad, held at UGC-ASC Auditorium JNTU Campus-Hyderabad.

 National Workshop on “Recent Innovations in Automobile Engineering (RIAE-2009)”, 20-22nd March, 2009 Sponsored by TEQIP, NIT_Warangal and Organized by Department of Mechanical Engineering, National Institute of Technology, Warangal.

 National Workshop on “Faculty Development Programme”, December 06-18, 2004 Sponsored by Department of Science & Technology, Govt. of India, New Delhi. Organized by Entrepreneurship Development Cell, Jawaharlal Nehru Technological University, Hyderabad.

 National Workshop of Short Term “English Language Development Programme” 10 April’06 to 01 June’06, Sponsored by Govt. of Andhra Pradesh. Organized by HSBC Electronic Data Processing_India.

 FORSTEFIESTA’14, a two day national level Technical Symposium on “Internal Combustion Engine” Organised by Dept. of Mechanical Engineering, Methodist College of Engineering & Technology on 25th & 26th February 2014.
 
FACULTY NAME :Dr.P.RAVI CHANDER
QUALIFICATION :B.E, M.Tech,Ph.D
EMAIL ID:vira755@gmail.com
TEACHING EXPERIENCE: 13 years
PREVIOUS WORK EXPERIENCE :I) Worked as Assistant Professor in Dr. V.R.K Engineering and Technology, Jagityal, Karimnager Dist. , from June 2005 to May2006.

II) Worked as Assistant Professor in GURUNANAK ENGINEERING COLLEGE,Ibrahimpatnam, Rangareddy Dist., from June2006 to May 2010.

III) Worked as Associate Professor in CRISTU JYOTHI INSTITUTE AND TECHNOLOGY, Jangoan, from July 2010 to May 2014.

IV) Worked as Assistant Professor in METHODIST COLLEGE OF ENGINEERING AND TECHNOLOGY, ABIDS, from Sep 2014 to till date.
Education Information: I) M.Tech. Energy System at Jawaharlal Nehru Technical University (JNTU), Anantapur.

II) B.E in Mechanical Engineering with specializationProduction at Vasavi college of Engineering,OU, Hyderabad.
Area of Specialization:Thermal Engineering
Subject Handled:I) Thermodynamics

II) Fluid Mechanics &Hydaulic Machines

III) Applied Thermodynamics

IV) Power Plant Engineering

V) Automobile Engineering

VI) Engineering Graphics

VII) Non- conventional Engineering
Research Publications: National and International journals:

1. P. Ravi Chander, Dr.B. Sudheer Prem Kumar and Dr. K. Vijaya Kumar Reddy, “Effect Of Exhaust Gas Recirculation On Combustion Characteristics And Emissions Of DI Diesel Engine Adopting Different Air Filters” ISST Journal of Mechanical Engineering, Vol. 6 No. 2, (July - December 2015), p.p. 11-22, ISSN 0976-7371 © Intellectuals Society for Socio-Techno Welfare.

2. P. Ravi chander, Dr. B.Sudheer Prem Kumar, Dr. K. Vijaya kumar reddy, “ Investigation into the effect of Exhaust gas recirculation(EGR) Adopting different Air filters on Performance and Emissions of DI Diesel Engine” IOSR journal of Mechanical and Civil Engineering (IOSR-JMCR), ISSN: 2320-334X, Volume 13, Issue 1, Ver I (Jan- Feb. 2016), PP 01-12.

3. P. Ravi Chander, Dr. B. Sudheer Prem Kumar & Dr. K. Vijaya Kumar Reddy, “Performance analysis of air filters for diesel engine: an experimental approach”, Issue-2, volume-4, (Feb-2014), ISSN-2249-3905.

4. P. Ravi Chander, Dr. B. Sudheer Prem Kumar & Dr. K. Vijaya Kumar Reddy, “the state of the art research on homogeneous charge comprwession ignition (hcci) engiens”, January4-6, 2012, Special issue, ISSN 0974-5904.

International conference:

1) Prof.R.V. Prasad, P.Ravi Chander , , “Simulation of critical crack length propagation using fracture mechanics” Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad.

2)P. Ravi Chander, Dr. B. Sudheer Prem Kumar & Dr. K. Vijaya Kumar Reddy, “effect of diesel – water emulsion and its combustion in diesel engine,” computational methods in engineering and sciences, IC-CMES ’09, 8-10, JANUARY 2009, Page No:665-669.

3) B. Satish kumar, M. Anjaiah, P. Ravi Chander, “taguchi approach to design optimization for quality and cost” IC-CMES ’09, 8-10, JANUARY 2009,

4) P. Ravi Chander, Dr. B. Sudheer Prem Kumar & Dr. K. Vijaya Kumar Reddy, “the state of the art research of nox reduction in diesel engine” Proceedings of the International Conference & XX National Conference On I.C. ENGINES AND COMBUSTION, December 6-9, 2007, Page No: 180-183.
Workshops/Seminars Attended• Attended a two days National seminar on computational Approaches in Manufacturing Processes (CAMP-2013), HELD AT M.V.S.R. Engineering College, March-2013.

• Attended a one day work shop on Advance trends in IC engines and Combustion, Held at JNTUH, Kukat Pally. February-2013.

• Attended a two weeks faculty development program on CFD application in aeronautical engineering, held at Gurunank institutions, Hyderabad.May-June-2012.

• Attended a three days training program on Auto Desk work shop on FEP, held at SRIST, Nalgonda, September-2011. • Attended a Two weeks ISTE Workshop on Thermodynamics in Mechanical Engineering, Held at JNTUH which is Organised by IIT Bombay, June. - 2011.

• Attended a One week Quality Improvement Program on Automotive Emissions Control, Held at Indian Institute of Technology Madras, October. - 2010

• Attended a Three days Training Program on Finite Difference Methods. Held at Osmania University, Hyderabad, July. - 2010.

• Attended a Three days National workshop on Recent Advances in Internal Combustion Engines. Held at NIT Warangal, March. - 2008.

• Attended a two day workshop on STAR-CCM+CFD. Held at Vasavi College of Engineering,April-2009
    
FACULTY NAME :PRASAD.MATAM
QUALIFICATION B.Tech(MECH), M.Tech(MACHINE DESIGN),
EMAIL ID:prasadmatam@gmail.com
TEACHING EXPERIENCE: 13 years
PREVIOUS WORK EXPERIENCE :I) Worked as Asst. profesor in S.S.J. ENGG COLLEGE HYDERABAD from feb2006 - may 2008.

II) Worked as Assistant Professor in ,M.L.R.I.T MAY 2008 TO OCTOBER 2008

III) Worked as Assistant Professor in ,AWARE MADHAVANJI COLLEGE OF ENGG HYD, NOVEMBER 2008 TO JUNE 2012

IV)Worked as Assistant Professor in ,S.S.J. ENGG COLLEGE HYDERABAD from JUNE 2012 TO MAY 2015

V) )WorkING as Assistant Professor in , METHODIST COLLEGE OF ENGINEEING AND TECHNOLOGY HYDERABAD SINCE MAY 2015
Education Information: M.Tech. in MACHINE DESIGN ,BHARATH UNIVERSITY,HYDERABAD

III) B.Tech in MECHANICAL ENGINEERING at Acharya Nagarjuna University, Guntur.
Area of Specialization:MACHINE DESIGN
Subject Handled:I) DESIGN OF NACHINE ELEMENTS

II)DYNAMICS OF MACHINARY

III)ENGINEERING DRAWING

IV)ENGINEERING MECHANICS

V)STRENGTH OF MATERIALS

VI)THERMODYNAMICS VII)HEAT TRANSFER
Research Publications: Thermal Analysis on Disc Brakes 371-375, THE INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.
ISBN:978-93-5258-110-8
Load Bearing Simulation Studies of Various Honeycomb Structures for Use as Impact Barriers in Automobiles 402-406 THE INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.
ISBN:978-93-5258-110-8
Structural Analysis of Automotive Disc Brakes 429-433 THE INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.
ISBN:978-93-5258-110-8
THE INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.ISBN:978-93-5258-110-8
Load Bearing Simulation Studies of Various Honeycomb Structures for Use as Impact Barriers in Automobiles 402-406THE INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.ISBN:978-93-5258-110-8
Structural Analysis of Automotive Disc Brakes 429-433THE INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.ISBN:978-93-5258-110-8
Workshops/Seminars AttendedADVANCED APPLICATIONS OF FINITE ELEMENT TECHNIQUES1 WEEK02-07 JANUARY 2016DME, METHODIST COLL. OF ENGG. & TECH.
ENGINEERING GRAPHICS WITH CAD1 WEEK28-07-2016 TO 02-08-2016DME, METHODIST COLL. OF ENGG. & TECH.
TEACHING METHODOLOGY&EFFECTIVE COMMUNICATION SKILLS2 DAYS14-06-2015 &15-06-2015STALLEY COLLEGE OF ENGG &TECH.
NATIONAL PROGRAMME ON TECHNOLOGY ENHANCED LEARNING1 DAY19-09-2015IIT MADRAS
UNIVERSALITY OF FOURIER
TRANSFORMS
1 DAY1/7/2015R&D CELL SIGMA/SCETW
INTERNET&DIGITAL CONVERGE IN INDIA-CRAFTING FUTURE5 DAYS10-06-2015 TO14-05-2015ISTE/METHODIST COLLEGE OF ENGG &TECH
 
FACULTY NAME :MR. Y MADHU MAHESWARA REDDY
QUALIFICATION :B.Tech(MECH), M.E(TURBO MACHINERY).
EMAIL ID:mmr315@gmail.com
TEACHING EXPERIENCE: 12 years
PREVIOUS WORK EXPERIENCE :I) Worked as Asst. Professor in St.Mary's College of Engineering and Technology, Nalgonda District, from June 2005- Oct 2009.

II) Worked as Assistant Professor in Mahaveer Institute of Science and Technology, Hyderabad District, from Oct 2009 to Jun 2011.

III) Working as Asst. Professor in Methodist College of Engineering and Technology since 2011
Education Information: I) M.E. in Mechanical Engineering with specialization Turbo Machinery at Osmania University,Hyderabad.

II) B.Tech in Mechanical Engineering at Rajeev Gandhi Memorial College of Engineering and Technology,Nandyal , Kurnool Dist.
Area of Specialization:TURBO MACHINERY
Subject Handled:I) Engineering Mechanics

II) Strength of Materials

III) Fluid Dynamics

IV) Thermo Dynamics

V) Hydraulic Machinery and System

VI) Applied Thermo Dynamics

VII) Heat Transfer

VIII) Engineering Drawing

IX) Machine Drawing
Research Publications: I) Y Madhu Maheswara Reddy “Structural Analysis of Automotive Disc Brakes 429-433,” INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.ISBN:978-93-5258-110-8

II) V S Ramesh Reddy, Y Madhu Maheswara Reddy “Load Bearing Simulation Studies of Various Honeycomb Structures for Use as Impact Barriers in Automobiles 402-406" INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.ISBN:978-93-5258-110-8

III)M Prasad, Y Madhu Maheswara Reddy “Thermal Analysis on Disc Brakes 371-375” INTERNATIONAL CONFERENCE ON PARADIGMS IN ENGG. & TECH.ISBN:978-93-5258-110-8

IV) Mr.Y.Madhu Maheswara Reddy, Published A Paper Titled “Heat Transfer Analysis Of Automotive Disc Brakes” In International Journal Of Advance Research In Science & Engineering, Vol. No.3, Issue No.9, And Issn-2319-8354(E).

V) Attended IEEE – International Conference On Advances In Engineering And Technology-(Icaet 2014) And Published A Technical Paper Titled “Design, Simulation And Analysis Of Automatic Multifastener Device” Isbn No.:978-1-4799-4949-6@2014 Ieee
Workshops/Seminars AttendedI) Attended a Workshop on “ADVANCED APPLICATIONS OF FINITE ELEMENT TECHNIQUES" Conducted by Mechanical Engg. Department, from 02-07 JANUARY 2016.

II)Attended a Workshop on “ENGINEERING GRAPHICS WITH CAD" Conducted by Mechanical Engg. Department, from 28-07-2016 TO 02-08-2016.

III) Attended 2 Week Iste Workshop On "Engineering Mechanics" Under The National Mission On Education Through Ict(Mhrd, Govt. Of India) from 26th Nov to 06th Dec 2013. Conducted By Iit Bombay. At Remote Center Mjcet, Banjara Hills Rd. No.-3_Hyderabad.

IV)Attended A One Day Faculty Development Program On “Effective Teaching Methodologies” At Institute Of Public Enterprise

V)Attended 2-Week ISTE Workshop On “Engineering Thermodynamics” Under The National Mission On Education Through Ict(Mhrd, Govt. Of India) from 11th Dec to 21st Dec 2012. Conducted By Iit Bombay. At Remote Center Mjcet, Banjara Hills Rd. No.-3_Hyderabad

VI)Attended 2-Week ISTE Workshop On “Computational Fluid Dynamics” Under The National Mission On Education Through Ict(Mhrd, Govt. Of India) from 12th June to 22nd June 2012. Conducted By Iit Bombay. At Remote Center Mjcet, Banjara Hills Rd. No.-3_Hyderabad

VII)Attended a two day workshop on “ Advances in Thermal Engineering(ATE-2014)”,” under TEQIP-II, Supported by IIPC & ISTE at CBIT, Gandipet, HYD.

VIII) Attendeda one day faculty development program on “Innovative Teaching Strategies” at Department of Business Management MCET, Hyderabad on 21 Dec 2013.
 
FACULTY NAME :R.VENKATA RAMI REDDY
QUALIFICATION :B.Tech(MECH.)
EMAIL ID:rachalavr@gmail.com
TEACHING EXPERIENCE:10 years
PREVIOUS WORK EXPERIENCE :36 years in HMT bearings
Education Information:
Area of Specialization:production maintainence tool engineering R&D
Subject Handled:Engineering graphics, Machine drawing, Production drawing,M&I,workshop
Research Publications:
Workshops/Seminars Attended
 
FACULTY NAME :G.SWETHA
QUALIFICATION :B.Tech(MECH), M.E(A&R)
EMAIL ID:shwetagandra@gmail.com
TEACHING EXPERIENCE:10 years
PREVIOUS WORK EXPERIENCE :Worked as Assistant Professor in HITAM from Feb 2004-Mar 2006

Worked as AssistantProfessor in Narsimha Reddy Engineering college from April 2006-April 2008

Worked as Assistant Professor in Stanley college of Engineering and Technology from Sept. 2010- July 2013
Education Information: I) M.E. in Mechanical engineering with specialization Automation and Robotics at UCE, O.U

III) B.Tech in Mechanical engineering from kakatiya institute of Technology & Sciences, K.U
Area of Specialization:3D Printing /Rapid prototyping, Automation, CAD/CAM
Subject Handled:Engineering Mechanics, Engineering Graphics, Solid Mechanics, Principles of Mechanical Engineering, Kinematics of Machinery
Research Publications: I) Presented a paper on "Multi objective optimization of EDM Process parameters of TI Alloy (BT20L) using Taguchi Method and Grey Relational Analysis" in ICPET-2016
Workshops/Seminars Attended
 
FACULTY NAME :PRABHAKAR. KADIYALA
QUALIFICATION :B.E(MECH), M.E(PRODUCTION).
EMAIL ID:saiprabhakar999@gmail.com
TEACHING EXPERIENCE:9 Years .
TEACHING EXPERIENCE:I) Worked as part time lecturer in M C E M E Tirumal giri HYD. - Five years

II) Worked as Assistant Professor in CMR T.C Dec 2013 to Jan 2014. - One year

III) Working as Assistant Professor in M C E T ,Abids, HYD - Since April 2015.
Industrial Experience: INDUSTRY- 10 Years.
PREVIOUS WORK EXPERIENCE :Woked at various Levels from Enginer to General Manager .
Education Information: DME , BE & ME
Area of Specialization:MANUFACTURING AND PRESSURE OPERATED EQUPMENTS.
Subject Handled:I) KINEMATICS OF MACHINES - FOR MECH ENGG.

II)MANUFACTURING PROCESS - FOR MECH ENGG.

III) ELEMENTS OF MECHANICAL ENGINEERING - FOR ECE BRANCH.

IV) ENGINEERING GRAPHICS - FOR FIRST YEARS

V) AUTOMOBILE ENGINEERING - FOR MECH ENGG.

VI) MACHINE DRAWING - FOR MECH ENGG.

VII) NON TRADITIONAL MACHINING AND FORMING - FOR MECH ENGG.

VIII) METROLOGY - FOR MECH ENGG.

IX) THERMODYNAMICS - FOR MECH ENGG.

X) METALLURGY AND MATERIAL SCIENCE - - FOR MECH ENGG.

XI) PRINCIPLES OF MECHANICAL ENGG - - FOR EEE BRANCH.
Membership:LIFE MEMBER OF THE INDIAN SOCIETY FOR TCHNICAL EDUCATION - LM 105680
LIFE MEMBER FOR INDIAN SOCIETY OF HEATING , REFRIGRATINGAND AIRCONDITIONING ENGINEERS - 537
Research Publications: 1. Micro Mechanical Analysis of FRP composite with orthotropic fibers using FEM. Paradigms in Engineering and Technology ,ISSN/ ISBN No 978-93-5258-110-8 - MCET.

2.PHYSICAL MODELLING OF SIX STRAND BILLET CASTER TUNDISH IN CONTINUOUS CASTING PROCESS. research paper submission for the 18th ISME Conference_NITW_2017.
Workshops/Seminars AttendedA National Level Conference on "Recent Innovations in Mechanical Engineering (RIME-2K14)" on 1st April, 2014 - AT CMRTC
Faculty Development program - 2014 - AT CMRTC
Techno Carnival Fest 2014- AT CMRTC
A Two Day National Work shop on Refrigeration and Air conditioning On 10 and 11 of February 2016
Short term Training program (STTP) on “Advanced Applications of Finite Element Techniques , 02.01.2016 to 07.01.2016, One week
International Conference on Paradigms in Engineering & Technology ( ICPET) 2-3, March 2016, Two days
ISTE supported one week short term training program on “Internet & Digital Convergence in India – Crafting the future” 10th – 14th , June 2015, One week
Teaching Methodology & effective Technical Communication Skills: A GATE WAY TO SUCCESS 14& 15 July 2015 Two days.
A one week Faculty development program on Engineering graphics with CAD 28-7-2016 to 3/8/2016
F D P on Role of basic Sciences in Enhancing the Quality of Engineering. 2-12-2016 TO 3-12-2016
 
FACULTY NAME :Mr. V.SATYA RAMESH REDDY
QUALIFICATION :B.Tech(MECH), M.Tech(MACHINE DESIGN)
EMAIL ID:vsrreddy.mtech@gmail.com
TEACHING EXPERIENCE:7 years
PREVIOUS WORK EXPERIENCE :• worked as a Teaching Assistant in 8 months at Vignan University in mechanical department.

• worked as an Asst.prof in 1 year at PRAGNA BHARATH INSTITUTE OF TECHNOLOGY in mechanical department

• worked as an Asst.prof since 3.5 year at KBR ENGINEERING COLLEGE which is nearby BiBi Nagar at HYDERABAD ….

• working as an Asst.prof since 01/09/2015 to TILL NOW at METHODIST COLLEGE OF ENGINEERING AND TECHNOLOGY which is at ABIDS.
Education Information: I) M.Tech. in Mechanical Enigineering with specialization Machine Design at Vignan University , vadlamudi.

II) B.Tech in Computer mechanical Engineering at LITAM, Dulipalla .
Area of Specialization:Mecanical softwares
Subject Handled:1. Auto Cad
2. CFD
3. Ansys
4. Solid Works
Research Publications: 1) Design of machine members.
2) Heat transfer
3) Refrigeration and air conditioning
4) Thermodynamics
5) Machine drawing
6) Engineering mechanics
7) Engineering drawing
8) Fluid mechanics and hydraulics machines.
9) Production technology
10) Operation research
Workshops/Seminars Attended1. Published a paper on "LOAD BEARING SIMULATION STUDIES OF VARIOUS HONEYCOMB STRUCTURES FOR USE AS IMPACT BARRIERS IN AUTOMOBILES" in ICPET -2016

2. Published a paper on "Thermal Analysis of Disk Breaks" in ICPET -2016

3. ADVANCED APPLICATIONS OF FINITE ELEMENT TECHINQUES 1 Week 02-01-2106 TO 07-01-2016 at Methodist College Of Engineering And Technology

4.ENGINEERING GRAPHICS WITH CAD 1 Week 28-07-2016 TO 03-08-2016 Methodist College Of Engineering And Technology
 
FACULTY NAME :Mr. K.SRINIVASARAGHAVAN
QUALIFICATION :B.Tech(MECH.), M.Tech(I.C.ENGINES)
EMAIL ID:ksraghavan@methodist.edu.in
TEACHING EXPERIENCE:4 years
PREVIOUS WORK EXPERIENCE :
Education Information: I) M.Tech. in Mechanical engineering with specialization Advanced IC Engines at Jawaharlal Nehru Technical University (JNTUA), Anantapuramu.

II) B.Tech in Mechanical engineering at Jawaharlal Nehru Technical University (JNTUA), Anantapuramu.
Area of Specialization:IC Engines
Subject Handled:I) Thermodynamics

II) Hydraulic Machinery and Systems

III) Heat transfer
Research Publications: 1)Md. Fakhruddin Hasan Nizami, Srinivas Raghavan, M.Y. Ali, Dr. Manzoor Hussain “Waste cooking oil as feedstock to produce biodiesel & Saponification reaction as by product” International Conference on Trend Setting Innovations in Chemical Sciences & Technology – Application in Pharma Industry (TSCST-APT), Under TEQIP – II @ Institute of Science & Technology JNTUH, Hyderabad 16th – 18th December 2015.

2)Md. Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Srinivas Raghavan “Performance of CI Engine with & without Swirl in Crown of the Piston with Varying Injection Pressure & Timing”. An International Conference & Exhibition on Cutting Edge Technological Challenges in Mechanical Engineering _CETCME-2015. In association with ISTE, Delhi and UPTU, Lucknow on 21st & 22nd March 2015, Organized by the Department of Mechanical Engineering, Noida Institute of Engineering and Technology, Greater Noida.

3)Md. Fakhruddin Hasan Nizami, Srinivas Ragahavan, Dr. M.Yousuf Ali, Dr. Manzoor Hussain “Modified CI Engine Performance by Varying Injection Timing”. International Journal for Trends in Engineering & Technology (IJTET), ISSN: 2349-9303, Volume 7 Issue 1 – July 2015.
Workshops/Seminars AttendedI) Attended a Workshop on “ADVANCED APPLICATIONS OF FINITE ELEMENT TECHNIQUES" Conducted by Mechanical Engg. Department, from 02-07 JANUARY 2016.

II)Attended a Workshop on “ENGINEERING GRAPHICS WITH CAD" Conducted by Mechanical Engg. Department, from 28-07-2016 TO 02-08-2016.

III)VII)Attended a two day workshop on “ Advances in Thermal Engineering(ATE-2014)”,” under TEQIP-II, Supported by IIPC & ISTE at CBIT, Gandipet, HYD.
 
FACULTY NAME :B.PRAVALIKA
QUALIFICATION :B.Tech(MECH), M.Tech(CAD/CAM).
EMAIL ID:pravalika1991@gmail.com
TEACHING EXPERIENCE:3 Years
PREVIOUS WORK EXPERIENCE :
Education Information: I) M.Tech. in Mechanical engineering with specialization CAD/CAM at Jawaharlal Nehru Technical University (JNTU), Hyderabad.

II) B.Tech in Mechanical Engineering at Mahaveer institute of science and technology(JNTU),HYDERABAD.
Area of Specialization:CAD/CAM
Subject Handled:I) MCMT

II)Manufacturing Process

III)CAD/CAM

IV) ENGG.GRAPHICS
Research Publications: I)K.ANUSHA,B.PRAVALIKA,Dr.A.RAJASHEKHAR,"INFLUENCE OF HEAT TREATMENT ON MECHANICAL PROPERTIES OF GARTER SPRINGS MADE BY ZIRCONIUM ALLOY"International Conference on Paradigms in Engineering & Technology ( ICPET) ISSN/ISBN No.978-93-5258-110-8, march 2016
Workshops/Seminars Attended Attended a Short term Training program (STTP) on “Advanced Applications of Finite Element Techniques” by "Methodist College of Engineering & Technology“, Abids,Hyderabad, from 02.01.2016 to 07.01.2016.

Attended a Workshop on " ENGINEERING GRAPHICS WITH CAD b y "Methodist College of Engineering & Technology“, Abids,Hyderabad, from 28-07-16 TO 3-8-16.
 
FACULTY NAME :RAMAGIRI PRERNA
QUALIFICATION :B.Tech(Mechanical), M.E(CAD/CAM)
EMAIL ID:prernar009@gmail.com
TEACHING EXPERIENCE:3 years
PREVIOUS WORK EXPERIENCE :I)worked as teaching assistant in Methodist College of Engineering and Technology for 2 years
Education Information: I)worked on "Design of Stabalized Platform for two axis Gimbal in RCI(Research Center Imarat)

II)Worked on Abrasive jet machining "Optimization of Process Parameters abrasive jet machining on Hastelloy" at St.Martins engineering college
Area of Specialization:CAD/CAM
Subject Handled:Automobile Engineering ,Modern machining and Manufacturing Process
Research Publications: I)Presented paper on "Green Engine" in Autocognizant at MVSR and won first prize.

II)R.PRERNA,Dr.A.RAJASHEKHAR,"DESIGN AND ANAYLSIS OF TWO AXIS GIMBAL PLATFORM IR SEEKER"International Conference on Paradigms in Engineering & Technology ( ICPET) ISSN/ISBN No.978-93-5258-110-8, march 2016
Workshops/Seminars AttendedI) Attended a Short term Training program (STTP) on “Advanced Applications of Finite Element Techniques” by "Methodist College of Engineering & Technology“, Abids,Hyderabad, from 02.01.2016 to 07.01.2016.

II)Attended a Workshop on " ENGINEERING GRAPHICS WITH CAD b y "Methodist College of Engineering & Technology“, Abids,Hyderabad, from 28-07-16 TO 3-8-16.
Assistant Professor -MECH 
Faculty name:G.SWETHA
Qualification:B.Tech(MECH), M.E(A&R)
E-mail Id :shwetagandra@gmail.com
Teaching Experience:10 years
Previous working Experience:I) Worked as Assistant Professor in HITAM from Feb 2004-Mar 2006
III) Worked as AssistantProfessor in Narsimha Reddy Engineering college from April 2006-April 2008
IV) Worked as Assistant Professor in Stanley college of Engineering and Technology from Sept. 2010- July 2013
Education Information:I) M.E. in Mechanical engineering with specialization Automation and Robotics at UCE, O.U

III) B.Tech in Mechanical engineering from kakatiya institute of Technology & Sciences, K.U
Area of Specialization:3D Printing /Rapid prototyping, Automation, CAD/CAM
Subject Handled:Engineering Mechanics, Engineering Graphics, Solid Mechanics, Principles of Mechanical Engineering, Kinematics of Machinery
Research Publications:I) Presented a paper on "Multi objective optimization of EDM Process parameters of TI Alloy (BT20L) using Taguchi Method and Grey Relational Analysis" in ICPET-2016
WORKSHOPS/SEMINARS ATTENDED
Assistant Professor -MECH
Faculty name:Mr. V.DURGESH
Qualification:B.Tech(MECH), M.Tech(THERMAL ENGG)
E-mail Id :vdurgesh@methodist.edu.in
Teaching Experience:3.8 years
Previous working Experience:I) Worked as Assistant Professor in GURU NANAK INSTITUTIONS TECHNICAL CAMPUS, Ibrahimpatnam from September 2013 -JUNE 2017.
Education Information:I) M.Tech. in Mechanical engineering with specialization as Thermal Engineering at Siddhartha Institute of Engineering and Technology, Ibrahimpatnam.

II) B.Tech in Mechanical engineering at Institute of Aeronautical Engineering, Dundigal.
III) Diploma in Mechanical Engineering at Quli Qutub Shah Polytechnic College, Bahadurpura.
Area of Specialization:Thermal Engineering
Subject Handled:I) Mechanics of Solids.
II) Production Technology.
III) Machine Drawing.
Research Publications:I) Natural Convective Heat Transfer for Inclined Narrow Plate


WORKSHOPS/SEMINARS ATTENDED
Asst. Professor -Mechanical
Faculty name:MANISH KUMAR NAYAK
Qualification:B.Tech(Mechanical), M.Tech(Materials Technology)
E-mail Id :nmanishkumar@methodist.edu.in
Teaching Experience:NIL
Previous working Experience:One year research experience at ISRO Satelite Centre, Bangalore
Education Information:I) M.Tech. in Materials and Metallurgical Engineering with specialization in Materials Technology at NIT Warangal.

II) B.Tech in Mechanical Engineering at Lovely Professional University, Phagwara, Punjab.
Area of Specialization:Materials Technology
Subject Handled:
Research Publications:I) Nanocolumnar crystalline vanadium oxide¬ molybdenum oxide antireflective smart thin films with superior nanomechanical properties, Nature Publishing Group Scientific Reports, doi: 10.1038/srep36811, 2016
II) Studies on Mo doped vanadium oxide film by pulsed RF magnetron sputtering, Wiley Group Surface and Interface Analysis, doi: 10.1002/sia.6226, 2017
III) Sputter-deposited low reflectance vanadium oxide-molybdenum oxide thin films on silicon, Infrared Physics and Technology, doi: 10.1016/j.infrared.2017.07.002

Conferences:1. Eighteenth National Seminar on Aerospace Structures (18th NASAS)
2. National Conference on Advances in Materials Processing and Characterization (NCAMPC)
3. International conference on Ceramic, Glass and Refractories-Emerging Innovations (CGREI-2016)
4. International conference on Ceramic & Advanced Materials for Energy and Environment (CAMEE)
5. International Conference on Nanotechnology (ICNano)
6. Journal’s Editorial Round Table 2016, Taylor & Francis Group.



Assistant Professor - Mech
Faculty name:Mrs.I.SOWJANYA
Qualification:B.Tech(Mech), M.E(CAD/CAM)
E-mail Id :isowjanya@methodist.edu.in
Teaching Experience:3 years
Previous working Experience:
Education Information:I) M.E in CAD/CAM at MVSREC,O.U, Hyderabad, T.S.
II) B.Tech in Mechanical Engineering at PRRM engg college,Hyderabad, A.P.
Area of Specialization:CAD/CAM
Subject Handled:I) Engineering Drawing
II) Finite Element Analysis
III) Automation in Manufacturing
iV) Instrumentation & Control Systems
V) Cad/Cam
Research Publications:
WORKSHOPS/SEMINARS ATTENDED
Assistant Professor -M.E
Faculty name:Mohammed Asadullah
Qualification:B.E,M.E
E-mail Id :mdasadullah@methodist.edu.in
Teaching Experience:7 years
Previous working Experience:I) Worked as lecturer in rajiv gandhi inst of technology bangalore August 2007-Aug 2009.
II) Worked as Assistant Professor in H.K.B.K college of engg bangalore June 2011- June 2015.
III) Worked as Associate Professor in nalla malla reddy engg college june 2016- june 2017.
.
Education Information:i) B.E mechanical engg from sapthagiri college of engg ii) M.E in thermal science engineering from university visvesvaraiah college of engg 2009-2011
Area of Specialization:thermal science engineering
Subject Handled:I) engineering mechanics
II) engineering drawing
Iii) thermodynamics
iV) heat transfer
V) thermal engineering-1
VI) thermal engg -2

Research Publications:I) 1.“Numerical Prediction of fluid flow and heat transfer in the serpentine duct cooling of a gas turbine blade.”
“International journal of emerging technology and advanced engineering”
( ISSN 2, Issue 2250-2459, Volume 5, May 2012 – IJETAE)
II) “Energy Based Analysis of a Thermal Power Station for Energy Efficiency Improvement”
International journal of modern engineering research
| IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss. 2 | Month 2014 | 1 |
iii)Optimization and Analysis (Failure Mode Effect and Finite Element) of a Common DTH Dish Antenna Bracket Assembly.”
International Journal of Mechanical Engineering & Technology (IJMET)
iv)Economical and technical way of ladle preheating by the use of flameless oxyfuel gas in steel industry.
Elixir international journal , year of publication june 2016




WORKSHOPS/SEMINARS ATTENDED1.I have attended a faculty development programme on computer aided engineering drawing conducted by AUTODESK at VTU Regional Office Bengaluru from 23rd to 26th April 2015.

2.I have done short term training programme on “Application of FEM in mechanical engineering” and Faculty awareness camp on entrepreneurship in june 2008.

3.I have presented a technical paper by title “Experimental study of clean burning vehicle fuel” for renewable energy sources and their applications” conducted by Institution of engineers Mysuru.

4.I attended in a five day faculty development programme on “Enabling technologies for exascale computing” held at HKBKCE under Computer society of india.

5.I participated in one day national level workshop on “Latex and its documentation for Research scholars” held at HKBKCE under Computer society of india.

6.I participated in a workshop on “COMSOL Multiphysics modelling workshop” organized by COMSOL group.
Assistant Professor - Mech
Faculty name:Mr. Shobab Anuparthi
Qualification:B.Tech(Mech), M.Tech(CAD/CAM
E-mail Id :ashobab@methodist.edu.in
Teaching Experience:3 years
Previous working Experience:I) Worked as Software Trainee in SUN-Tech solutions at Hyderabad from June 2012- November 2014.
II) Worked as Assistant Professor in PACE Institute of Technology & Sciences at Ongole, Prakasam District, from Feb 2015 to June 2017.
Education Information:I) M.Tech in CAD/CAM at Sreenidhi Institute of Science & Technology (JNTU-Hyderabad), Hyderabad, T.S.
II) B.Tech in Mechanical Engineering at QIS College of Engineering & Technology (JNTU-Kakinada), Ongole, A.P.
Area of Specialization:CAD/CAM
Subject Handled:I) Engineering Drawing
II) Robotics
III) Finite Element Analysis
IV) Automation in Manufacturing
V) Instrumentation & Control Systems
VI) Cad/Cam
Research Publications:
WORKSHOPS/SEMINARS ATTENDEDI) Participated in One Day National Level Faculty Development Program on “ADVANCED TRENDS IN MANUFACTURING” at Pace Institute of Science & Technology, Ongole.
II) Participated and presented a paper entitled “ADVANCED TRENDS IN IC ENGINES” in EMER’GE’-2008, A National level Technical Conference.
III) Participated in three day workshop on. "ARTIFICIAL NEURAL NETWORKS & MACHINE LEARNING" at Sreenidhi Institute of Science & Technology, Yamnampet in 2009.
IV) Participated in three day workshop on “THE APPLICATION OF CFD TOOLS FOR MODELING AND ANALYSIS OF TURBO MACHINERY COMPONENTS” at Sreenidhi Institute of Science & technology, Yamnampet in 2009