Name of the faculty:  DR.A.Rajasekhar                                            Designation: Prof. & HOD

International journals
  • “Fracture Analysis to determine strength of Metal –Composite Joints” International Journal & Magazine of Engineering, Technology, Management and Research, ISSN No: 2348-4845, Vol.4 (2017), Issue 6 (June), pp 427 – 433, June 2017
  • “Simulation of Flow and Structural Analysis of Industrial Blower “, Int. Journal of Engineering Research and Application ISSN : 2248-9622, Vol. 7, Issue 8, ( Part -1) August 2017, pp.82-89
  • “Optimization of Process Parameters in Abrasive Jet Drilling Of Hastelloy Using Taguchi Method” International Journal of Engineering Science Invention ISSN (Online): 2319 – 6734, ISSN (Print): 2319 – 6726 Volume 6 Issue 11 November 2017 50-55

Proceedings of Conferences and Presentations

 

  1. “Heat Treatment Methods Applied to Martensitic Stainless Steels”, , A National Level Technical Conference on “Emerging Trends in Mechanical Engineering (ETME – 2004)”, 23-24, Jan’2004,organized by Sree Visvesvaraya Institute of Tech & Sc., Mahabubnagar
  1. “Weldability of austenitic stainless steels”, proc SVITS QUEST-2005, SVITS, Mahabubnagar 2005.
  1. “A review on welding aspects of martensitic stainless steels”, Proc. of National Conference on “Computational Methods in Mechanical Engg.”, College of Engg., Osmania University, 2005, p205-212.
  1. “Improved Characteristics of Burnished surfaces from the application of Burnishing Direction”, Proc. of National Conference on “Computational Methods in Mechanical Engg.”, College of Engg., Osmania University, 2005,pp110-116
  1. “Effects of post weld heat treatments on impact toughness of AISI 431 electron beam welds.” Proc. XXIII National Convention of Mechanical Engineers and National Seminar on “Emerging Trends in manufacturing Systems and Technologies” September 10-12, 2007, Institute of Engineers, Hyderabad. 
  1. “Microstructure and mechanical properties of 16Cr-2Ni stainless steel Electron beam welds-Influence of single and double austenitization treatments” forthcoming Int. Symp. for Research Scholars on Metallurgy, Materials Science and Engineering on December 10-12, 2008 organized by Department of Metallurgical and Materials Engineering, IIT Madras (Received best paper Award).
  1. Optimization of post weld heat treatments for improved mechanical properties in AISI 431 electron beam weld, National Welding seminar, 2009-10, Kolkata
  1. Coparative Evaluation Of Mechanical Properties And Microstructure Features In EB And Friction Welds Of AISI 431 At Different Post Weld Heat Treatments", Dec. 21 – 23, 2010 National Welding Seminar 2010 at Vizag, Indian Institute of Welding (IIW), Vizag
  1. Pitting Corrosion in AISI 431 EB welds, 29th & 30th November 2013 at Int. Conf. On Emerging Trends In Engineering And Management – Icetem2k13, Sree Visvesvaraya Institute of Tech & Sc., Mahabubnagar in collaboration with “World Academy Of Science And Engineering – Warse “
  1. “Current Trends in Welding Technologies – Applications”, Invited Talk at All India Seminar on Emerging Technologies in Material Sciences and Engineering, organized by Institution of Engineers on18-19 March, 2014
  1. “A Review on Welding Metallurgy of Martensitic Stainless Steels”, 24-25,Feb’2014 International Conference on Emerging Trends in Mechanical Engineering (ICEME – 2014) Department of Mechanical Engineering, Abhinav Hi-Tech College of Engineering, Hyderabad.
  1. “Testing and Estimation of Mechanical properties of E-glass (V-9) composite material”, 02-03, March 2016 International Conference on Paradigms in Engineering and Technology (ICPET-2016), organized by Methodist College of Engineering and Technology, Hyderabad.
  1. “Influence of Heat treatment on mechanical properties of Garter spring made by Zirconium alloy”, 02-03, March 2016 International Conference on Paradigms in Engineering and Technology (ICPET-2016), organized by Methodist College of Engineering and Technology, Hyderabad.
  1. “Optimization of process parameters of Ultrasonic machining of Titanium”, 02-03, March 2016 International Conference on Paradigms in Engineering and Technology (ICPET-2016), organized by Methodist College of Engineering and Technology, Hyderabad.
  1. Sharath Chandra, A.Rajasekhar, D.Ramana Reddy, “Comparative Study, Design and Analysis of Automobile Leaf Spring made by Steel and Natural Composites”, ICAMM16, Hyderabad(Accepted for presentation and publication)

Book Publications:

  1. Authored a text book titled “Engineering Materials” for Diploma in Mechanical Engineering
  1. Co-authored a chapter titledMicrostructure and Mechanical Properties of 16Cr-2Ni Stainless Steel Fusion and Solid State Welds- Influence of Post Weld Treatments”, published in “Advanced Materials Research, Vol 794(2013) as a special book titled “A Century of stainless steels” by Trans Tech publications, Switzerland 289-304

 

 

Name of the faculty:  DR.P.shailesh                                      Designation: Professor

 

Name of the faculty:  DR.U.S.Varaprasad                               Designation: Professor

 

Name of the Faculty:  Md. Fakhruddin H.N.                               Designation:  Associate Professor

 PUBLICATION_INTERNATIONAL JOURNAL

  1. Md. Fakhruddin Hasan Nizami, Dr. M.Manzoor Hussain, Mohammed Adnan Ahmed “Exhaust Gas Emission Analysis for Variable Injection Pressure 1-Cylinder Engine for 2 Different Feedstock Biodiesel Blended in Diesel”. International Journal of Latest Trends in Engineering and Technology (IJLTET) e-ISSN: 2278-621X p-ISSN: 2319-3778 Pages: 263-269. Volume 7 Issue 1 May 2016.
  2. Md. Fakhruddin Hasan Nizami, Dr. M.Manzoor Hussain, Md. Samiuddin Siddiqui “Experimental Investigations on Single Cylinder CI Engine for Variable Compression Ratio & Variable Injection Pressure Using Treble Fuel” International Journal of Innovations in Engineering and Technology (IJIET), ISSN: 2319 – 1058, Volume – 7 Issue – 1, P.No. 218 to 223, June 2016.
  3. Md. Fakhruddin Hasan Nizami, Dr. M.Yousuf Ali, Dr. M. Manzoor Hussain. “Hydrogen Enrich Treble Biofuel Blended With Diesel for Performance and Emissions Characteristics on CI Engine”. International Journal of Automotive & Mechanical Engineering (IJAME) ISSN: 2229-8649(print); 2180-1606(online). Automotive Engineering Centre, Universiti Malaysia Pahang. Volume-14 Issue – 3, December 2017. UGC Approved.
  4. Md. Fakhruddin Hasan Nizami, Dr. M.Yousuf Ali, Dr. M.Manzoor Hussain “Experimental Investigation on CI Engine for Performance, Emission and Combustion Characteristics of Dual Biodiesel Blended in Diesel”. International Journal for Research in Applied Science & Engineering Technology (IJRASET). ISSN: 2321-9653. Volume 5 Issue XI, November 2017. UGC Approved.

 PAPERS COMMUNICATED IN INTERNATIONAL JOURNALS

  1. Md. Fakhruddin Hasan Nizami, Dr. M.Y. Ali, Dr. M. Manzoor Hussain “Experimental Investigation of CI Engine For Performance and Emission of WCOBD & PSBD Biodiesel Blended In Diesel”. Jordan Journal of Mechanical and Industrial Engineering, Ministry of Higher Education and Scientific Research Jordanian University, Jordan.
  2. Md. Fakhruddin Hasan Nizami, Dr. M.Y. Ali, Dr. M. Manzoor Hussain “Experimental Analysis of Injection Opening Pressure Variation of CI Engine for Performance, Emission and Combustion of Dual Biodiesel Blended In Diesel”. Journal of Thermal Engineering, Yildiz Technical University Press, Besiktas, Istanbul 34349 Turkey.

 

  1. Md. Fakhruddin Hasan Nizami, Dr. M.Y. Ali, Dr. Manzoor Hussain M, Srinivas Raghavan “Performance of CI Engine with & without Swirl in Crown of the Piston with Varying Injection Pressure & Timing”. NIET Journal of Engineering & Technology (NIETJET), ISSN: 2229-5828.

  PAPER PRESENTATION_INTERNATIONAL CONFERENCE

  1. Md. Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Soma Kumari “Air Conditioning System_Criteria for Green Building”. International Conference on Recent Advances in Mechanical Engineering_INCRAME’12. 19th & 20th April 2012 at Dr. MGR Educational & Research Institute University, Adayalampattu, Chennai Tamil Nadu.
  1. Md. Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Srinivas Raghavan “Performance of CI Engine with & without Swirl in Crown of the Piston with Varying Injection Pressure & Timing”. An International Conference & Exhibition on Cutting Edge Technological Challenges in Mechanical Engineering _CETCME-2015. In association with ISTE, Delhi and UPTU, Lucknow on 21st  & 22nd March 2015, Organized by the Department of Mechanical Engineering, Noida Institute of Engineering and Technology, Greater Noida.
  1. Md. Fakhruddin Hasan Nizami, M.Y. Ali, Pradeep Kumar. “Modified CI Engine Performance by Varying Injection Timing”. International Conference on Advance Research in Technology and Engineering – ICARTE’15 held at Ranganthar Institute of Engineering & Technology Athipalayam Coimbatore – 641110 on 31st March 2015.
  1. Md. Fakhruddin Hasan Nizami, Dr. Mohammed Yousuf Ali, A.P.V.Prasad Rao “4 Stroke Engine with 2 Power Strokes”. 2nd International Conference on Innovative Research in “Mechanical, Electrical, Electronics, Civil, Computer Science and Information Technology” (MECIT-2015) Organized by “Krishi Sanskriti” at Jawaharlal Nehru University, New Delhi-110067 on 22nd and 23rd August, 2015.
  1. Md. Fakhruddin Hasan Nizami, Srinivas Raghavan, M.Y. Ali, Dr. Manzoor Hussain “Waste cooking oil as feedstock to produce biodiesel & Saponification reaction as by product” International Conference on Trend Setting Innovations in Chemical Sciences & Technology – Application in Pharma Industry (TSCST-APT), Under TEQIP – II @ Institute of Science & Technology JNTUH, Hyderabad 16th – 18th December 2015.
  1. Mohd. Haseeb Ullah Khan, Md. Fakhruddin Hasan Nizami “Phenomenon of Gravitational Waves Reaching the Earth Surface due to Black holes in Space” International conference on Paradigms in Engineering & Technology (ICPET 2016) in association with Indian Society for Technical Education, ISTE-Delhi & the world academy of research in science and engineering (WARSE) organized by Methodist College of Engineering & Technology, Abids Hyderabad Telangana State India, on 2nd & 3rd March 2016.
  1. A.P.V.Prasad Rao, K.Sundeep Kumar, R.Charan nayak Md.Fakhruddin H.N. “Modification of IC Engine to Solar Powered Compressed Air Engine” International conference on Paradigms in Engineering & Technology (ICPET 2016) in association with Indian Society for Technical Education, ISTE-Delhi & the world academy of research in science and engineering (WARSE) organized by Methodist College of Engineering & Technology, Abids Hyderabad Telangana State India, on 2nd & 3rd March 2016.
  1. Md. Fakhruddin H.N, Md. Samiuddin Siddiqui, Dr. Mohammed Yousuf Ali, Dr.Manzoor Hussain “Experiment on Single Cylinder CI Engine with Various Proportion of WCOBD in Diesel” International conference on Paradigms in Engineering & Technology (ICPET 2016) in association with Indian Society for Technical Education, ISTE-Delhi & the world academy of research in science and engineering (WARSE) organized by Methodist College of Engineering & Technology, Abids Hyderabad Telangana State India, on 2nd & 3rd March 2016.

 

PAPER PRESENTATION_NATIONAL CONFERENCE

 

  1. Md. Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. “Decentralized Energy System for Rural India _A Future Option”. National Conference on “Energy Security for Rural Development – ESRD 2009”, 26th March 2009. Sponsored by Ministry of New and Renewable Energy (MNRE) Govt. of India & University Grand Commission (UGC). Organized by Rural Energy Centre Gandhigram rural Institute – Deemed University, Gandhigram, Dindigul 624 302, Tamilnadu.

 

  1. Md. Fakhruddin Hasan Nizami “Hydrogen Generation” two days National Conference, Sanketika 2K11, 17th & 18th March 2011. Organized by Lords Institute of Engineering & Technology, ISO: 9001-2008 Certified, Himayathsagar, Hyderabad-500008.

WORKSHOP ORGANISED / COORDINATED

 

  1. FORSTEFIESTA’14, a two day National level Workshop on “Internal Combustion Engine” Organized by Dept. of Mechanical Engineering, Methodist College of Engineering & Technology on 25th & 26th February 2014.

 

  1. MATHERIC-UTSAV’15, two day State level technical symposium on Refrigeration & Air-Conditioning on 27th & 28th February 2015 Organized by Department of Mechanical Engineering. Methodist College of Engineering & Technology.

 

  1. A 3 Day National Level Technical Training Workshop on Automobile Engineering & Vehicle Dynamics” held on 06 Oct – 08 Oct 2015, In Association with Formula 1 Racing Marshalls, Elite – Techno Group, Organized by Department of Mechanical Engineering. Methodist College of Engineering & Technology.

 

  1. 2 day National level technical training workshop on Refrigeration & Air-Conditioning on 10th & 11th February 2016 Organized by Department of Mechanical Engineering. Methodist College of Engineering & Technology.

WORKSHOP PARTICIPATION

 

  1. Faculty Development Program on “Innovative Teaching Strategies” Organized by the Development of Business Management, Conducted by Methodist College of Engineering & Technology, Abids Hyderabad on 21st December 2013.

 

  1. 2-week ISTE Workshop on “Engineering Thermodynamics” under the National Mission on Education through ICT(MHRD, Govt. of India) 11th to 21th Dec. 2012 Conducted by IIT Bombay. At remote center MJCET, Banjara hills Rd. No.-3_Hyderabad

 

  1. 2-week ISTE Workshop on “Computational Fluid Dynamics” under the National Mission on Education through ICT(MHRD, Govt. of India) 12th to 22th June, 2012 Conducted by IIT Bombay. At remote center MJCET, Banjara hills Rd. No.-3_Hyderabad

 

 

  1. Coursework on “Research Methodology”, 06th to 11th June 2011. Organised by Research & Development Cell, Sponsored by JNT University, Kukatpally Hyderabad – 85.

 

  1. QIP Workshop of Short Term Training Programme on “Time Series Modeling & Spectral Analysis-Theory  & Application”, July 12-17, 2010 Sponsored by AICTE, New Delhi. Organized by the Department of Chemical Engineering IIT_Madras

 

  1. National Workshop on “Hydrogen & Fuel Cell Technologies for Future Energy Options”, 22nd & 23rd December 2008. TEQIP Sponsored Event, Organized by CENTRE FOR ENVIRONMENT, Institute of Science and Technology, Jawaharlal Nehru Technological University Hyderabad, held at UGC-ASC Auditorium JNTU Campus-Hyderabad.

 

  1. National Workshop on “Recent Innovations in Automobile Engineering (RIAE-2009)”, 20-22nd March, 2009 Sponsored by TEQIP, NIT_Warangal and Organized by Department of Mechanical Engineering, National Institute of Technology, Warangal.

 

  1. National Workshop on “Faculty Development Programme”, December 06-18, 2004 Sponsored by Department of Science & Technology, Govt. of India, New Delhi. Organized by Entrepreneurship Development Cell, Jawaharlal Nehru Technological University, Hyderabad.

 

  1. National Workshop of Short Term “English Language Development Programme” 10 April’ 06 to 01 June’ 06, Sponsored by Govt. of Andhra Pradesh. Organized by HSBC Electronic Data Processing_India.

 

  1. FORSTEFIESTA’ 14, a two day national level Technical Symposium on “Internal Combustion Engine” Organised by Dept. of Mechanical Engineering, Methodist College of Engineering & Technology on 25th & 26th February 2014.

 

  1. Engineering Graphic with CAD, A one week Faculty Development Program, organized by Department of Mechanical Engineering, Methodist College of Engineering & Technology, Abids – Hyderabad. On 28-07-2016 to 03-08-2016.

 

  1. Institution Building – Role of faculty, A one week Faculty Development Program, conducted by Siva Sivani Institute of management, Kompally – Secunderabad-500100. Telangana, India. On 06-07-2017.

 

  1. Faculty Development Program, A three day Faculty Development Program, conducted by Methodist College of Engineering & Technology, King Koti Road, Abids, Hyderabad, Telangana – 500001. From 05-07-2017 to 07-07-2017.

 

  1. Siemens Certified Professional Program, A one day Technical Seminar on Learning & Ideas conducted by CoreEL, Technologies, Koramangala, Bangalore – 560034. On 20-12-2017

 

Name of the faculty:  Dr. P. Ravi chander                                   Designation:Assistant professor

National & International journals

 

  1. R.V. Prasad, P.Ravi Chander , , “Simulation of Critical Crack length Propagation using Fracture Mechanics”in International Journal of Computational Engineering Research(IJCER) (ISSN2250-3005) VOL-4, APR-16.
  2. Ravi chander, Dr. B.Sudheer Prem Kumar, Dr. K. Vijaya kumar reddy, “ Investigation into the Effect of Exhaust gas recirculation(EGR) Adopting different Air filters on Performance and Emissions of DI Diesel Engine” IOSR journal of Mechanical and Civil Engineering (IOSR-JMCR), ISSN: 2320-334X, Volume 13, Issue 1, Ver I (Jan- Feb. 2016), PP 01-12.
  3. Ravi chander, Dr. B.Sudheer Prem Kumar, Dr. K. Vijaya kumar reddy, “ Effect of exhaust gas recirculation on combustion characteristics and emissions of DI Diesel engine adopting different air filters”,ISST Journal of Mechanical Engineering. volume 6, No.2, July-December 2015) pp 11-22, ISSN: 0976-7371.
  4. Ravi Chander, Dr. B. Sudheer Prem Kumar & Dr. K. Vijaya Kumar Reddy, “Performance analysis of air filters for diesel engine: an experimental approach”, International Journal of Research in Engineering & Applied Sciences, Issue-2, volume-4, (Feb-2014), ISSN-2249-3905.
  5. Ravi Chander, Dr. B. Sudheer Prem Kumar & Dr. K. Vijaya Kumar Reddy, “The state of the art research on homogeneous charge compression ignition (hcci) engines”, International Journal of Earth Sciences and Engineering. January 4-6, 2012, Special issue, ISSN: 0974-5904.

 

 

International conference

  1. R.V. Prasad, P.Ravi Chander , , “Simulation of critical crack length propagation using fracture mechanics” Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016,  MCET, Hyderabad.
  2. Ravi Chander, Dr. B. Sudheer Prem Kumar & Dr. K. Vijaya Kumar Reddy, “effect of diesel – water emulsion and its combustion in diesel engine,” computational methods in engineering and sciences, IC-CMES ’09, 8-10, JANUARY 2009, Page No:665-669.
  3. Satish kumar, M. Anjaiah, P. Ravi Chander, “Taguchi Approach to Design Optimization for Quality and cost” IC-CMES ’09, 8-10, JANUARY 2009,
  4. Ravi Chander, Dr. B. Sudheer Prem Kumar & Dr. K. Vijaya Kumar Reddy, “the state of the art research of nox reduction in diesel engine” Proceedings of the International Conference & XX National Conference On I.C. ENGINES AND COMBUSTION, December 6-9, 2007, Page No: 180-183.

 

 

Name of the faculty:  R.V.Prasad                                               Designation: Assistant Professor

Publications

.

  • R.V. Prasad, P.Ravi Chander , , “Simulation of critical crack length propagation using fracture mechanics”in IJCER (ISSN2250-3005) VOL-4, APR-16

●        Published a paper   titled  “ lagrangian model for simulating turbulent dispersion and agglomeration of droplets with in a spray ” in ijates (issn 2348-7550) vol 02/issue 11/ nov’2014

●        Published a paper titled”modeling and experimental validation of combustion in di diesel engine through cfd simulation” in ijtes (issn 2320- 8007) vol 2(11),pp 2550-2552 nov’ 2014.

  • Published a paper titled “evaluation of mechanical properties of coconut coir/bamboo fibre reinforced polymer matrix composites” in ijmmse(issn2278-2524) ref:ijmmseoct2013

●        Published a paper titled “fsw of ppl reinforced with nanosized composites, effects on mech&microstructural properties ” in ijea (issn; 2248-9622 vol 2 issue 6 nov/dec 12 pp288-296)

●        Published a paper titled on “microstructure& mech properties  of friction stir welded dissimilar aluminium alloys ” in ijsrp (iosr jmce) issn 2253153 vol 2 nov/dec12

●        Published a paper titled “experimental investigation of drilling parameters on composite material” in ijsrp journal issn2278-1684 vol2 issue3 oct12

 

Conferences

  • Presented a paper titled “ mechanical evaluation with fe analysis of sandwich panels for wind turbine blade” in wemep-2012(indo danish int conf) at bits-pilani hyd campus  on 22 & 23 nov’12
  • Presented a paper titled “ nano fluids:an effective coolant in automotive applications” in nanocon -12(int conf) at bharati vidya peeth univ college of engg pune on 18&19 oct’2012
  • Presented a paper titled “friction stir welding of polypropylene reinforced with al2o3 nano composites, effect on mechanical & microstructural properties” in nconsea 2012 at center for nanoscience and technology, ist, jntu, hyd on 27th & 28th april 2012.
  • Presented a paper titled “evaluation of matrix factorisation techniques for cell formation in manufacturing” in rame 2012 at oucoe, hyd on 16th & 17th march 2012.
  • Presented a paper titled “artificial intelligence techniques in solidification simulation” at scad college of engineering & technology in ncrtct- 09 at tirunevel, tamilnadu on 3rd april, 2009.
  • Presented a paper titled soft computing techniques in “solidification simulation of casting using soft computing methodologies” in nc on softcomputing at institute of road and transport, erode, tamilnadu, on 18th march, 2009

 

 

 

 

Name of the faculty:  Mr.Y. Madhu Maheswara Reddy              Designation: Assistant Professor

INTERNATIONAL CONFERENCES:

  1.  “DESIGN, SIMULATION AND ANALYSIS OF AUTOMATIC MULTIFASTENER  DEVICE”, ICAET 2014, ISBN No.: 978-1-4799-4949-6 @ 2014 IEEE
  2.            “STRUCTURAL ANALYSIS OF AUTOMOTIVE DISC BRAKES”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad.

 

  1.  “THERMAL ANALYSIS ON DISC BRAKES”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad.

 

  1.  “LOAD BEARING SIMULATION STUDIES OF VARIOUS HONEYCOMB STRUCTURES FOR USE AS IMPACT BARRIERS IN AUTOMOBILES”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad.

 

 

 

INTERNATIONAL JOURNALS:

 

  1. “HEAT TRANSFER ANALYSIS OF AUTOMOTIVE DISC BRAKES”, International Journal of Advance Research In Science And Engineering, IJARSE, Vol. No.3, Issue No.9, September 2014.  ISSN-2319-8354(E)

 

  1. “IMPLEMENTATION AND TESTING OF TURBO CHARGER ON A DIESEL ENGINE”, International Journal of Creative Research Thoughts, IJCRT/Vol 6 / Issue 2/ 232.(ISSN: 2320 - 2882)

 

  1. “FATIGUE ANALYSIS OF CHAIN SPROCKET USING FINITE ELEMENT”, International Journal of Advance Engineering and Research Development, IJAERD Volume 5, Issue 04.(ISSN: 2345 - 4470)

 

  1. “DESIGN AND ANALYSIS OF EXCAVATOR BUCKET TOOTH”, International Journal of Modern Trends in Engineering & Research, IJMTER, Volume 5, Issue 4. (ISSN: 2349-5162)

 

  1. “EXPERIMENTAL DETERMINATION AND OPTIMIZING THE PROCESS PARAMETERS OF AISI 304 USING GTAW”, International Journal of Creative Research Thoughts - IJCRT/Vol 6 / Issue 2/ 123.(ISSN : 2320 - 2882)

 

  1. “DESIGN AND DEVELOPMENT OF FABRICATION DRAWINGS FOR TWIN SEATER WHEEL CHAIR”, International Journal of Modern Trends in Engineering & Research, IJMTER, Volume 5, Issue 4. (ISSN: 2349-5162)

 

  1. “SIMULATION OF THE CRACK PROPAGATION USING FRACTURE MECHANICS TECHNIQUES IN TITANIUM-BASED ALLOY SKIN”, International Journal of Mechanical and Production Engineering Research and Development, IJMPERD Vol. 2 Issue 2. (ISSN 2249-6890)

 

  1. “OPTIMIZATION OF DESIGN PARAMETER OF CONSTANT BLANK THICKNESS BY VARYING FRICTION COEFFICIENT USING EXPLICIT FEA ON DEEP DRAWING PROCESS OF A CYLINDRICAL PLATE”, International Journal of Emerging Technologies and Innovative Research, IJETER, Vol 5, Issue 4.(ISSN: 2349-5162)

 

  1. “CFD ANALYSIS OF AN ECONOMIZER FOR 25MM DESIGN BEND RADIUS IN A FIRE TUBE BOILER”, International Journal of Modern Trends in Engineering & Research, IJMTER, Volume 5, Issue 4. (ISSN: 2349 – 9745)

 

  1. “CFD ANALYSIS OF SOLAR ABSORBER PLATE”, International Journal for Research in Applied Science & Engineering Technology, IJRASET, Vol 5, Issue 4. (ISSN: 2321 – 9653)

 

EVENTS PARTICIPATED:

  1. Participated in a three day faculty development program at MCET from 05th  to 07th July 2017

 

  1. Participated in A one Week workshop on “ADVANCED APPLICATIONS OF FINITE ELEMENT TECHNIQUES” at MCET, 02-07 January 2016.

 

  1. Participated in a two day workshop on “ADVANCES IN THERMAL ENGINEERING (ATE-2014)”,” under TEQIP-II, Supported by IIPC & ISTE at CBIT, Gandipet, HYD.

 

  1. Participated in a one day faculty development program on “INNOVATIVE TEACHING STRATEGIES” at Department of Business Management MCET, Hyderabad on 21 Dec 2013.

 

  1. Participated in a Two week ISTE workshop on “ENGINEERING MECHANICS” conducted by IIT Bombay (MHRD) from 26th Nov to 06th Dec 2013.

 

  1. Participated in a Two week ISTE workshop on “ENGINEERING THERMODYNAMICS” conducted by IIT Bombay (MHRD) from 11th Dec to 21st Dec 2012.

 

  1. Participated in a one day faculty development program conducted by Siva Sivani Institute of Management on 12 July 2012, the topic is “BACK TO BASICS & EFFECTIVE COMMUNICATION FOR ACADEMIA”.

 

  1. Participated in a Two week ISTE workshop on “COMPUTATIONAL FLUID DYNAMICS” conducted by IIT Bombay (MHRD) from 12th June to 22nd June 2012.

Name of the faculty:  Mr.M Prasad                       Designation: Assistant Professor

International conference

 

  1. Prasad “Structural Analysis of Automotive Disc Brakes”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad.

 

  1. M Prasad, Y. Madhu Maheswara Reddy, V S Ramesh Reddy, “Thermal Analysis on Disc Brakes”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad.

 

  1. V S Ramesh Reddy, M Prasad, Y. Madhu Maheswara Reddy, “Load Bearing Simulation Studies of Various Honeycomb Structures for Use as Impact Barriers in Automobiles”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad

 

International journals

 

1)  “EXPERIMENTAL DETERMINATION AND OPTIMIZING THE PROCESS PARAMETERS OF AISI     304 USING GTAW”, International Journal of Creative Research Thoughts - IJCRT/Vol 6 / Issue 2/ 123.(ISSN : 2320 - 2882)

 

2)  “IMPLEMENTATION AND TESTING OF TURBO CHARGER ON A DIESEL ENGINE”, International Journal of Creative Research Thoughts, IJCRT/Vol 6 / Issue 2/ 232.(ISSN: 2320 - 2882)

 

3)    “OPTIMIZATION OF DESIGN PARAMETER OF CONSTANT BLANK THICKNESS BY VARYING FRICTION COEFFICIENT USING EXPLICIT FEA ON DEEP DRAWING PROCESS OF A CYLINDRICAL PLATE”, International Journal of Emerging Technologies and Innovative Research, IJETER, Vol 5, Issue 4.(ISSN: 2349-5162)

4)  “CFD ANALYSIS OF AN ECONOMIZER FOR 25MM DESIGN BEND RADIUS IN A FIRE TUBE BOILER”, International Journal of Modern Trends in Engineering & Research, IJMTER, Volume 5, Issue 4. (ISSN: 2349 – 9745)

 

5)   CFD ANALYSIS OF SOLAR ABSORBER PLATE”, International Journal for Research in Applied Science & Engineering Technology, IJRASET, Vol 5, Issue 4. (ISSN: 2321 – 9653)

 

 

6)“Design And Analysis Of Gas Turbine Blade” International Journal Of  Research In Advanced     Engineering Technologies ,, Ijraet, Vol. No.6, Issue No.2-4, July 2017 

 

7) “Flow Analysis Of Positive Displacement Pump Lobe Rotor Using Ansys Workbench” International Journal Of Professional Engineering Studies,Ijpres, Vol. No.8, Issue No.5-46, August 2017  

8)” Two Phase Flow Simulation In Y Joint Duct Used In Pipe Line Applications”     International Journal Of Professional Engineering Studies,Ijpres, Vol. No.8, Issue No.5-46, August 2017

EVENTS PARTICIPATED

  1. Participated in One week workshop on “Advanced applications of finite element  techniques “at M.C.E.T from 02-01-2016 to 07-01-2016
  2. Participated in One week workshop on “Engineering graphics with CAD”at M.C.E.T from 28-07-2016 to 02-08-2016
  3. Participated in Two days  workshop on “Teaching Methodology& Effective Communication Skills” at STALLEY COLLEGE OF ENGG &TECH   from 14-06-2015 to 15-06-2015
  4. Participated in One day  workshop on “National programme on technology enhanced learning” at G.P,R.E.C on 19-09-2015
  5. Participated in one day  workshop on “Universality of FourierTransforms” at STALLEY COLLEGE OF ENGG &TECH   on 01-07-2015
  6. Participated in Five days  workshop on “Internet& digital converge in India-crafting future” at M.C.E.T from 10-06-2015 to 14-06-2015
  7. Participated in three days  workshop on “Advances in research and innovations in Mechanical Engineering” at M.J.C.E.T from 30-01-2017 to 01-02-2017
  8. Participated in three days  workshop on “Faculty development programme” at M.C.E.T from 05-07-2017 to 06-07-2017
  9. Participated in One day  workshop on “Composite material and aero space applications ” at I.A.R.E  on 20-09-2008

 

 

Name of the faculty: K.Srinivasa Raghavan                          Designation: Assistant Professor

International journals

K.srinivasaraghavan1, V.pandurangadu2 “Effect of induced turbulence in a C.I engine by varying compression ratio and injection timing on the performance of the engine” IJERT Vol-3 August-2014.

International conference

   K.srinivasaraghavan, K.vijay kumar, J.Rangababu, Dr.P.Shailesh “Experiementation and charectarization of C.I engine performance with design modification in piston by inducing turbulence”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad.

 

Name of the faculty:  Mr.K.Prabhakar                          Designation: Assistant Professor

Research Project:

Power development from  Solar energy with compact and economic device ( review)

National journal:

  • Micro mechanical analysis of frp composite with orthotropic fibers using finite element method Proceedings of  International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016,  MCET, at Hotel Katriya , Hyderabad.  (  In progress)

International conference:

  • K. “Micro mechanical analysis of frp composite with orthotropic fibers using finite element method Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016,  MCET, at Hotel Katriya , Hyderabad.

 

 

Name of the faculty:  Mr.V.Satya Ramesh Reddy                Designation:Assistant professor

International conference

  • V S Ramesh Reddy, M Prasad, Y. Madhu Maheswara Reddy, “Load Bearing Simulation Studies of Various Honeycomb Structures for Use as Impact Barriers in Automobiles”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad
  • M Prasad, Y. Madhu Maheswara Reddy, V S Ramesh Reddy, “Thermal Analysis on Disc Brakes”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad.

 

 

 

Name of the faculty:  Ms.K.Anusha                                  Designation: Assistant Professor

International conference

K.Anusha, B.Pravalika, DR.A.Rajasekhar “Influence of heat treatment on mechanical properties of garter springs”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad

Name of the faculty:  Ms.B.Pravalika                                   Designation: Assistant Professor

International conference       

K.Anusha, B.Pravalika, DR.A.Rajasekhar “Influence of heat treatment on mechanical properties of garter springs”, Proceedings of International Conference on Paradigms in Engineering and Technology, Hyderabad, 2-3 March 2016, MCET, Hyderabad

Name of the faculty:  Mrs.G.Shwetha                                          Designation: Assistant professor

International conference

R.Swetha and DR. L. Siva Rama Krishna, “Multi-objective optimization of EDM process parameters on Ti Alloy (BT20L) using Taguchi Method and Grey Relational Analysis.”, ICMAM16, Hyderabad(Accepted for presentation and publication)

R.Swetha and K.Swapna, “Design and fabrication of fretting wear test rig”, MECHOVISIONS09, KITS, Warangal.

 

Papers presented:

Presented a paper in International Conference on Multi objective optimization of EDM process parameters on Ti Alloy using Taguchi Method and Grey Relational Analysis, 2-3 March2016,MCET, Hyderabad.

 

Presented a paper in  International Conference  on Design and fabrication of fretting wear test rig, 10-11 March 2009, KITS, Warangal.

 

Name of the faculty:  Mr. A Shobab                                            Designation: Assistant professor

International conference:

 

Papers presented:

 

Name of the faculty:  Mr. Mohammed Asadullah                                   Designation: Assistant professor

 

International journal:

1.“Numerical Prediction of fluid flow and heat transfer in the serpentine duct cooling of a gas turbine blade.”

“International journal of emerging technology and advanced engineering”

( ISSN 2250-2459, Volume 2, Issue 5, May 2012 – IJETAE)

  1. 2.Energy Based Analysis of a Thermal Power Station for Energy Efficiency Improvement”

International journal of modern engineering  research

| IJMER | ISSN: 2249–6645 | www.ijmer.com | Vol. 4 | Iss. 2 | Month 2014 | 1 |

 3.” Optimization and Analysis (Failure Mode Effect and Finite Element) of a Common DTH Dish Antenna Bracket Assembly.”International Journal of Mechanical Engineering & Technology (IJMET)

4.Economical and technical way of ladle preheating by the use of flameless oxyfuel gas in steel industry.

Elixir international journal , year of publication june 2016

 

Name of the faculty:  Mr. V Durgesh                                          Designation: Assistant professor

International conference:

V.Durgesh, 62nd  Congress of Indian Society Of  Theoretical And Applied Mechanics (ISTAM - 2017), jointly organisesd by indian institute of technology, Kharagpur and university colleges of Engineering and science at Osmania University, Hyderabad. from 15-18 December 2017.

International journals

V.Durgesh, “Natural Convective Heat Transfer for Inclined Narrow Plate”, International Journal of Advance Technology and Innovative Research,(IJATIR) Vol. No.8, Issue No.15, October  2016         ISSN-2348-2370.

Name of the faculty:  Mr. N Manish Naik                                   Designation: Assistant professor