reasearch-meth1

CSE DEPARTMENT

  • “XNNDF: Towards a framework for flexible Near-Duplicate Document detection using Supervised and Unsupervised Learning”, by Mrs. Lavanya Pamulaparty, In the proceedings of International Conference on Intelligent Computing, Communication and Convergence(ICCC-2014), ELSEIVER,27th – 28th, December 2014, Bhubaneshwar, Odisha. (Accepted for publishing in ELSEIVER Procedia Computer Science)
  • “A Novel Approach for avoiding overload in the Web Crawling”, by Mrs. Lavanya Pamulaparty, IEEE Sponsored 2014 International Conference on High Performance and Applications (ICHPCA-2014), 22-24 December 2014, C. V. Raman College of Engineering,Bhubaneswar, Odisha(Accepted for publication in IEEE Explore)
  • “A Near Duplicate Detection Algorithm to facilitate Document Clustering” by  Mrs.Lavanya Pamulaparty, International Journal of Data Mining and Knowledge Management Process,Vol.4,No.6,November 2014, pp 39-49 , under ISSN:2230-9608[Online] and 2231-007X[Print]
  • “An Approach to Identify Dishonest nodes using MAC Protocol in Multihop Cellular Networks”, Mrs. Lavanaya Pamulaparty, T Praveen Kumar and P Vijaya Babu Varma IOSR Computer Journal of Engineering, Vol.16, Issue 6, 2014, pp 1-7.
  • “Quality of Service Routing for Multipath Manet” by Ms. Afreen Begum Sana, SPACES – 2015, an International Conferene on Signal Processing and Communication Engineering System. Published in “IEEE Conference proceeding with ISBN-978-1-4799-6108-5).
  • A Paper by name “Energy Efficient Proactive Routing for Modified DSDV in Mantes” by Mrs. V. Sailaja and Ms. Afreen is accepted for publication in IJRET.
  • A Paper by name “Smart Phone Based Authentication System using Gestures” by Mr. R. Sandeep is accepted for publication in IJRET.
  • V. S. Giridhar Akula published an article “Rule Based Systems for Medical Diagnosis” in the book “Fuzzy expert Systems for medical diagnosis” published by IGI Global USA.

  1. Giridhar Akula, Mrs. Lavanya Pamulaparty, Mrs. V. Sailaja, Mr. Tauqueerullah and Ms. Dilnaz Roshan are trainers for IOCCC program
  1. Sailaja and Mr. Rajashekhar are coordinators for “Tech Bevy” technical club.
  1. Praveen Kumar is coordinator for “CSE Bytes” , Alumni Association.
  1. Poonam Chankya led “The Motherhood Walkathon” along with CSE II year and III year students to mark the “World Breastfeeding Week 2014” held on 9thAugust 2014, in support of breastfeeding which is aimed to be part of Limca Book of Records.
  1. Lavanya visited as a Resource Person organized by JNTU, Hyderabad on Semantic Web.
  1. Lavanya visited as a Resource Person to St. Peters Engineering College March 27th2014.
  1. Praveen Kumar is a guest visiting faculty for BITS Pilani, Hyderabad Campus.
  1. Poonam Chanakya is visiting as a Part-Time faculty for M. Sc, Dept of Sciences, Osmania University.

  1. Sailaja, Ms. Afreen Begum Sana and Mr. Sandeep attended National Conference – NCEITCS – 2015,held on 1st and 2nd April 2015 by Vasavi College of Engineering and Technology.
  1. Lavanya attended a International Conference on Intelligent Computing, Communication and Convergence(ICCC-2014), ELSEIVER,27th – 28th, December 2014, Bhubaneshwar, Odisha.
  1. Lavanya attended IEEE Sponsored 2014 International Conference on High Performance and Applications (ICHPCA-2014), 22-24 December 2014
  1. Preeti C.M. and Mrs. T. V. Lakshmi Sukrutha attended a National Level Workshop on “Next Generation Devices and Computing” on 28thand 29th November, 2014.
  1. Tauqeerullah and Mr. Rajashekhar attended “NBA Accredition Program” held at Indur College during May 2014.
  1. Lavanya, Mrs. V. Sailaja, Mr. T. Praveen Kumar and Mr. Sandeep attended a one day Faculty Development Program on “Effective Teaching Methodologies” at Institute of Public Enterprise.
  1. Poonam Chanakya attended a Two day Workshop on “Image Processing” at Vasavi College of Engineering and Technology.
+ Paper Publications
  • “XNNDF: Towards a framework for flexible Near-Duplicate Document detection using Supervised and Unsupervised Learning”, by Mrs. Lavanya Pamulaparty, In the proceedings of International Conference on Intelligent Computing, Communication and Convergence(ICCC-2014), ELSEIVER,27th – 28th, December 2014, Bhubaneshwar, Odisha. (Accepted for publishing in ELSEIVER Procedia Computer Science)
  • “A Novel Approach for avoiding overload in the Web Crawling”, by Mrs. Lavanya Pamulaparty, IEEE Sponsored 2014 International Conference on High Performance and Applications (ICHPCA-2014), 22-24 December 2014, C. V. Raman College of Engineering,Bhubaneswar, Odisha(Accepted for publication in IEEE Explore)
  • “A Near Duplicate Detection Algorithm to facilitate Document Clustering” by  Mrs.Lavanya Pamulaparty, International Journal of Data Mining and Knowledge Management Process,Vol.4,No.6,November 2014, pp 39-49 , under ISSN:2230-9608[Online] and 2231-007X[Print]
  • “An Approach to Identify Dishonest nodes using MAC Protocol in Multihop Cellular Networks”, Mrs. Lavanaya Pamulaparty, T Praveen Kumar and P Vijaya Babu Varma IOSR Computer Journal of Engineering, Vol.16, Issue 6, 2014, pp 1-7.
  • “Quality of Service Routing for Multipath Manet” by Ms. Afreen Begum Sana, SPACES – 2015, an International Conferene on Signal Processing and Communication Engineering System. Published in “IEEE Conference proceeding with ISBN-978-1-4799-6108-5).
  • A Paper by name “Energy Efficient Proactive Routing for Modified DSDV in Mantes” by Mrs. V. Sailaja and Ms. Afreen is accepted for publication in IJRET.
  • A Paper by name “Smart Phone Based Authentication System using Gestures” by Mr. R. Sandeep is accepted for publication in IJRET.
  • V. S. Giridhar Akula published an article “Rule Based Systems for Medical Diagnosis” in the book “Fuzzy expert Systems for medical diagnosis” published by IGI Global USA.
+ Faculty Distinction

  1. Giridhar Akula, Mrs. Lavanya Pamulaparty, Mrs. V. Sailaja, Mr. Tauqueerullah and Ms. Dilnaz Roshan are trainers for IOCCC program
  1. Sailaja and Mr. Rajashekhar are coordinators for “Tech Bevy” technical club.
  1. Praveen Kumar is coordinator for “CSE Bytes” , Alumni Association.
  1. Poonam Chankya led “The Motherhood Walkathon” along with CSE II year and III year students to mark the “World Breastfeeding Week 2014” held on 9thAugust 2014, in support of breastfeeding which is aimed to be part of Limca Book of Records.
  1. Lavanya visited as a Resource Person organized by JNTU, Hyderabad on Semantic Web.
  1. Lavanya visited as a Resource Person to St. Peters Engineering College March 27th2014.
  1. Praveen Kumar is a guest visiting faculty for BITS Pilani, Hyderabad Campus.
  1. Poonam Chanakya is visiting as a Part-Time faculty for M. Sc, Dept of Sciences, Osmania University.

+ Conferences / Workshops
  1. Sailaja, Ms. Afreen Begum Sana and Mr. Sandeep attended National Conference – NCEITCS – 2015,held on 1st and 2nd April 2015 by Vasavi College of Engineering and Technology.
  1. Lavanya attended a International Conference on Intelligent Computing, Communication and Convergence(ICCC-2014), ELSEIVER,27th – 28th, December 2014, Bhubaneshwar, Odisha.
  1. Lavanya attended IEEE Sponsored 2014 International Conference on High Performance and Applications (ICHPCA-2014), 22-24 December 2014
  1. Preeti C.M. and Mrs. T. V. Lakshmi Sukrutha attended a National Level Workshop on “Next Generation Devices and Computing” on 28thand 29th November, 2014.
  1. Tauqeerullah and Mr. Rajashekhar attended “NBA Accredition Program” held at Indur College during May 2014.
  1. Lavanya, Mrs. V. Sailaja, Mr. T. Praveen Kumar and Mr. Sandeep attended a one day Faculty Development Program on “Effective Teaching Methodologies” at Institute of Public Enterprise.
  1. Poonam Chanakya attended a Two day Workshop on “Image Processing” at Vasavi College of Engineering and Technology.

EEE DEPARTMENT

  • The research incubation center was conceived and opened in the college where in many high end systems with suitable softwares like MATLAB SIMULINK , MULTISIM, PSIM etc. were established.
  • The faculty members of our dept have been actively participating in providing base work for their research publications in this center.
  • Students are being constantly motivated to simulate the problems for deriving the results of many IEEE papers
  • It is strongly envisaged that the final year students would be exposed to this incubation center to take up their mini projects and final year projects on software / hardware basis right from their third year of their undergraduate study
  • Sridhar Panthangi, Improving the Stability and Reliability of Wind Power Grid Connected Systems, International Journal of Engineering Research and Applications (IJERA, ISSN: 2248-9622), Vol. 3, Issue 6, Nov – Dec 2013.
  • Sridhar Panthangi, Novel Loaded – Resonant Converter & Application of DC to DC Energy Conversions Systems, International Refereed Journal of Engineering and Science, (IRJES), Vol. 2, Issue 11, November 2013.
  • Sridhar Panthangi, An Improved Power Quality using 30 pulses, AEC, 3rd National Conference on Emerging Technologies in Electrical & Electronics Engineering (NCEEE-2012).
  • Sridhar Panthangi, Power Quality improvement for AC – DC varying loads, AEC, 2nd National Conference on Emerging Technologies in Electrical & Electronics Engineering (NCEEE-2011).
  • Rajini Kanth P attended a Two Day Workshop on ‘Modelling & Simulation of Electrical Power Systems (MSEPS)’ , held on 19th & 20th of September 2014 at Loyola-ICAM College of Engineering & Technology (LICET)
  • Saketha.V attended one day workshop on MATLAB/SIMULINK conducted by Mathworks August 2014
  • K.Harikrishna attended one day workshop on MATLAB/SIMULINK conducted by Mathworks August 2014
  • K.Kartheek and Mr. B.Madhukar Visited 132 / 33 KV Substaion at S.R. Nagar on 6th sept 2013
  • V. Saketha and Mr.CH.Srinivas attended a two day workshop at CPTI Hyderabad on protection of transformers
  • G.V.R Murthy , Mr.Mohan Krishna , Mr.B.Lenin and Mr.P.Rajini Kanth visited 132 / 33 KV Substaion at S.R. Nagar on 26th sep-2014 .

 

  • G Mohankrishna attended one day workshop on INDUSTRY INSTITUTE AND DEFENCE LABS INTERACTION conducted by Osmania university on August 30th 2014.
  • Mr Madhukar and Mr Kartheek have attended the Orientation programme for NAAC & NBA Accreditation at Indur Institute of Engg & Tech, Siddipet from 5th May to 87th May 2014.
  • G Mohankrishna attended one day seminar on COMBATING CORREPTION – TECHNOLOGY AS AN ENABLER CONDUCTED BY Osmania university 29th OCT 2014.
  • Mr Sridhar Panthangi, A two week AICTE Sponsored Faculty Development Programme on Renewable Energy Sources – Integration to Power Systems, organized by Jayamukhi Institute of Technological Sciences, Narsampet from 25th November to 7th December 2013.
  • Mr Sridhar Panthangi, A two week AICTE Sponsored Faculty Development Programme on Micro Grid & Distributed Generation, organized by Kakatiya Institute of Technology & Science, Warangal from 28th October to 9th November 2013.
  • Mr Sridhar Panthangi, A two day workshop on National Programme on Technology Enhanced Learning (NPTEL, IIT Madras – 2012), organized by IIT Madras at NIT – Warangal, 31st August 2012 & 1st September 2012.
  • Mr Sridhar Panthangi, A two day workshop on Applications of MATLAB in Electrical & Electronics Engineering (AMEEE – 2012), organized by Adam’s Engineering College, August – 18th & 19th 2012.
+ Research Activity EEE
  • The research incubation center was conceived and opened in the college where in many high end systems with suitable softwares like MATLAB SIMULINK , MULTISIM, PSIM etc. were established.
  • The faculty members of our dept have been actively participating in providing base work for their research publications in this center.
  • Students are being constantly motivated to simulate the problems for deriving the results of many IEEE papers
  • It is strongly envisaged that the final year students would be exposed to this incubation center to take up their mini projects and final year projects on software / hardware basis right from their third year of their undergraduate study
+ Paper Publications
  • Sridhar Panthangi, Improving the Stability and Reliability of Wind Power Grid Connected Systems, International Journal of Engineering Research and Applications (IJERA, ISSN: 2248-9622), Vol. 3, Issue 6, Nov – Dec 2013.
  • Sridhar Panthangi, Novel Loaded – Resonant Converter & Application of DC to DC Energy Conversions Systems, International Refereed Journal of Engineering and Science, (IRJES), Vol. 2, Issue 11, November 2013.
  • Sridhar Panthangi, An Improved Power Quality using 30 pulses, AEC, 3rd National Conference on Emerging Technologies in Electrical & Electronics Engineering (NCEEE-2012).
  • Sridhar Panthangi, Power Quality improvement for AC – DC varying loads, AEC, 2nd National Conference on Emerging Technologies in Electrical & Electronics Engineering (NCEEE-2011).
+ Industrial Visits / Workshops
  • Rajini Kanth P attended a Two Day Workshop on ‘Modelling & Simulation of Electrical Power Systems (MSEPS)’ , held on 19th & 20th of September 2014 at Loyola-ICAM College of Engineering & Technology (LICET)
  • Saketha.V attended one day workshop on MATLAB/SIMULINK conducted by Mathworks August 2014
  • K.Harikrishna attended one day workshop on MATLAB/SIMULINK conducted by Mathworks August 2014
  • K.Kartheek and Mr. B.Madhukar Visited 132 / 33 KV Substaion at S.R. Nagar on 6th sept 2013
  • V. Saketha and Mr.CH.Srinivas attended a two day workshop at CPTI Hyderabad on protection of transformers
  • G.V.R Murthy , Mr.Mohan Krishna , Mr.B.Lenin and Mr.P.Rajini Kanth visited 132 / 33 KV Substaion at S.R. Nagar on 26th sep-2014 .

 

  • G Mohankrishna attended one day workshop on INDUSTRY INSTITUTE AND DEFENCE LABS INTERACTION conducted by Osmania university on August 30th 2014.
  • Mr Madhukar and Mr Kartheek have attended the Orientation programme for NAAC & NBA Accreditation at Indur Institute of Engg & Tech, Siddipet from 5th May to 87th May 2014.
  • G Mohankrishna attended one day seminar on COMBATING CORREPTION – TECHNOLOGY AS AN ENABLER CONDUCTED BY Osmania university 29th OCT 2014.
  • Mr Sridhar Panthangi, A two week AICTE Sponsored Faculty Development Programme on Renewable Energy Sources – Integration to Power Systems, organized by Jayamukhi Institute of Technological Sciences, Narsampet from 25th November to 7th December 2013.
  • Mr Sridhar Panthangi, A two week AICTE Sponsored Faculty Development Programme on Micro Grid & Distributed Generation, organized by Kakatiya Institute of Technology & Science, Warangal from 28th October to 9th November 2013.
  • Mr Sridhar Panthangi, A two day workshop on National Programme on Technology Enhanced Learning (NPTEL, IIT Madras – 2012), organized by IIT Madras at NIT – Warangal, 31st August 2012 & 1st September 2012.
  • Mr Sridhar Panthangi, A two day workshop on Applications of MATLAB in Electrical & Electronics Engineering (AMEEE – 2012), organized by Adam’s Engineering College, August – 18th & 19th 2012.

Mechanical DEPARTMENT

  • Students Are Encouraged To Make Working Prototypes For Their Projects In Final Year. Recently Made Prototypes Include Suitcase Car, Pressurized Air Scooter, Open Type Four Wheeler, Solar Power Based Products.

 

  • Students & Faculty Are Encouraged To Take-Up Research Projects From Industries & Other Organizations.

 

  • Students & Faculty Regularly Publish Technical Papers In Journals & Participate In National/International Conferences.
  • Usv Prasad, K. Madhu Murthy And G. Amba Prasad Rao Published A Paper Titled “Effective Utilization Of B20 Blend With Oxygenated Additives Thermal Science”, Year 2011, Vol. 15, No. 4, Pp. 1175-1184.

 

  • V. Prasad, K. Madhu Murthy And G. Amba Prasad Rao Published A Paper Titled “Nox Reduction Strategies For A B40 Fuelled Direct Injection Diesel Engine” International Journal Of Mechanical Engineering January-June 2012 • Volume 5 • Issue 1.

 

  • Vara Prasad, K. Madhu Murthy, G. Amba Prasad Rao Published A Paper Titled “Effective Reduction Of Emissions Of A Di Diesel Engine Fuelled With Biodiesel And Diesel Blends With Oxygenated Additives” Journal Of Alternate Energy Sources & Technologies, Stm Journals Volume 3, Issue 2, August 2012, Pages 1-10.

 

  • Amba Prasad Rao, K.Madhu Murthy And Usv Prasad “Influence Of Fuel Injection Parameters Of Di Diesel Engine Fuelled With Biodiesel And Diesel Blends” International Conference On Mechanical, Automobile And Robotics Engineering (Icmar 2011) Penang,Malaysia, 11-12 Feb.2012.

 

  • Amba Prasad Rao, K.Madhu Murthy And Usv Prasad “Effect Of Oxygenated Additives On Control Of Emissions In A Di Diesel Engine Using Biodiesel-Diesel Blends” International Conference On Computer, Electrical, Electronics & Mechanical Engineering (Iceeme’2012) Penang, Malaysia, 11-12 Feb.2012

 

  • Usv Prasad, K. Madhu Murthy And G. Amba Prasad Rao “Effect Of Ethanol And Diethyl Ether As Additives For Improving Performance Of Engine With Biodiesel -Diesel Blends” Proceedings Of International Conference On Advances In Energyresearch (Icaer 2011), Iit Mumbai.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. “Decentralize Energy System For Rural India – A Future Option”. International Journal Of Integrated Energy Systems (Ijies),Issn: 0975-2978, Volume 1 Number 2, Pp 153-162, July-December 2009.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Pradeep Kumar “Modified Ci Engine Performance By Varying Injection Timing”. International    Journal For Trends In Engineering & Technology (Ijtet),Issn: 2349-9303. Paper Selected.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Soma Kumari “Air Conditioning System_Criteria For Green Building”. International Conference On Recent Advances In Mechanical Engineering_Incrame’12. 19th& 20th April 2012 At Dr. Mgr Educational & Research Institute University, Adayalampattu, Chennai Tamil Nadu.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Srinivas Raghavan “Performance Of Ci Engine With & Without Swirl In Crown Of The Piston With Varying Injection Pressure & Timing”. An International Conference & Exhibition On Cutting Edge Technological Challenges In Mechanical Engineering_Cetcme-2015. In Association With Iste, Delhi And Uptu, Lucknow On 21st& 22nd March 2015, Organized By The Department Of Mechanical Engineering, Noida Institute Of Engineering And Technology, Greater Noida.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Pradeep Kumar “Modified Ci Engine Performance By Varying Injection Timing”. International Conference On Advance Research In Technology And Engineering – Icarte’15 Held At Ranganthar Institute Of Engineering & Technology On 31-03-2015.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. “Decentralize Energy System For Rural India _A Future Option”. National Conference On “Energy Security For Rural Development – Esrd 2009”, 26thMarch 2009. Sponsored By Ministry Of New And Renewable Energy (Mnre) Of India & University Grand Commission (Ugc). Organized By Rural Energy Centre Gandhigram Rural Institute – Deemed University, Gandhigram, Dindigul 624 302, Tamilnadu.

 

  • Fakhruddin Hasan Nizami “Hydrogen Generation” Two Days National Conference, Sanketika 2k11, 17th& 18th March 2011. Organized By Lords Institute Of Engineering & Technology, Iso: 9001-2008 Certified, Himayathsagar, Hyderabad-500008.

 

  • V. Prasad Has Published A Paper Titled “Lagrangian Model For Simulating Turbulent Dispersion And Agglomeration Of Droplets Within A Spray” In International Journal Of Advanced Technology In Engineering And Science (Issn 2348-7550), Volume 02, Issue 11, And November 2014.

 

  • V.Prasad, Published A Paper Titled – “Evaluation Of Mechanical Properties Of Coconut Coir/Bamboo Fibre Reinforced Polymer Matrix Composites” In Ijmmse (Issn2278-2524) Ref: Ijmmse.

 

  • R.V.Prasad, Published A Paper Titled “Fsw Of Ppl Reinforced With Nanosized Composites, Effects On Mech&Microstructural Properties” In Ijera.

 

  • R.V.Prasad, Published A Paper Titled On “Microstructure& Mech Properties Of Friction Stir Welded Dissimilar Aluminium Alloys” In Ijsrp (Iosr Jmce) Issn 2253153 Vol 2.

 

  • R.V.Prasad, Published A Paper Titled “Experimental Investigation Of Drilling Parameters On Composite Material” In Ijsrp Journal Issn2278-1684 Vol2 Issue3.

 

  • Madhu Maheswara Reddy, Published A Paper Titled “Heat Transfer Analysis Of Automotive Disc Brakes” In International Journal Of Advance Research In Science & Engineering, Vol. No.3, Issue No.9, And Issn-2319-8354(E).

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, “Development Of A Composite Material From Agro Waste For Wear Resistance Application”, Materials Science Forum Vols. 773-774 (2014) Pp 319-324, Trans Tech Publications, Switzerland,Doi:10.4028/Net/Msf.773-774.319.

 

  • Deepika1, C. Bhaskar Reddy2 Ramana Reddy3, “Fabrication And Performance Evaluation Of A Composite Material For Wear Resistance Application”, International Journal Of Engineering Science And Innovative Technology (Ijesit), Volume 2, Issue 6, Nov 2013, Pp: 66-71 Issn: 2319-5967. Impact Factor:1.753

 

  • Dareddy Ramana Reddy1, Swadesh Kumar Singh2, B.Balunaik3, “Ingredients Composition Formulations And Development Of A New Metal Matrix Composite For Friction Lining Applications Using Minitab16”, International Journal Of Engineering And Technology, Publishers Gstf, Singapore, Volume 1, Number 1, June 2012 Pp: 99-104, Issn: 2251-3701. Doi : 10.5176/2251-3701_1.1.17

 

  • Bhaskar Reddy1, C.Eswara Reddy2Dareddy Ramana Reddy3,“Experimental Investigation Of Surface Finish And Material Removal Rate Of P20 Die-Tool Steel In Wire-Edm Using Multiple Regression Analysis”, International Journal Of Engineering And Technology, Publishers Gstf, Singapore, Volume 1, Number 1, June2012, Pp: 113-118, Issn: 2251-3701.  Doi : 10.5176/2251-3701_1.1.19

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, “Effect Of Grit Size And Abrasive Type On Surface Finish Of A Machined Al-SicpMmc”, International Journal Of Manufacturing Engineering, Sme Publications, Volume 7, Issue 2, June 2012,   Pp 67-71, Issn: 0973-6867. Impact Factor: 1.071

 

  • Aditya Nag1Dareddy Ramana Reddy2,“Performance Improvement Of An Oil Fired Furnace Through Oscillating Combustion Technology”,International Journal Of Scientific Essays And Research (Ijser), Usa, Volume3, Issue 7, 2012issn: 2229-5518, Research Publication ( Global Institute For Scientific Information (Gisi),  Impact Factor:0.629

 

  • Dareddy Ramana Reddy1, Swadesh Kumar Singh2, B.Balunaik3“Development Of Bio-Degradable Friction Material For Brake Pads From Palm Kernel Shell”, International Journal Of Mechanical Engineering And Materials Sciences Vol. 4, Number 1, Pp 1–6, Issn: 0974-584x, Impact Factor 36

 

  • Dareddy Ramana Reddy1, B.Balu Naik2, T. Kishen Kumar Reddy3, “Prediction Of Surface Roughness In Machining Of Homogenized SicpReinforced Aluminium Metal Matrix Composites Using Multiple Regression Analysis”  International Journal Of Manufacturing Science And Technology Vol. 4, Number 2, Pp  81–91. Dec2010, Issn: 0973-5496.Impact Factor 0.28

 

  • Ramana Reddy Dareddy1, M.V. Aditya Nag2, M.S.N. Gupta3, “Stress And Deformation Analysis Of Aircraft’s Fuel Tank Under Different Inertia Load Cases In Addition To A Static Test Pressure Using Fea”, Proceedings Of The International Conference On Advances In Manufacturing And Materials Engineering, 23-25 September 2014, Kuala Lumpur Malaysia.

 

  • Moses R Krupavaram1,Ramana Reddy2, M.Amaresh Reddy3, “Review On Bio Machining Of Copper”, Proceedings Of The International Mechanical Engineering Congress (Imec 2014): June 13-15, 2014, Nit – Trichy, Pp: 14-17, Isbn 978-93-84389-01-7

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, Swadesh Kumar Singh3,“Development Of A Composite Material From Agro Waste For Wear Resistance Application”, 15th International Conference On Advances In Materials & Processing Technologies (Ampt2012), September 22-26,2012, University Of Wollongong, Australia. Paper Id:Pnam-12007

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, Swadesh Kumar Singh3, “Ingredients Composition Formulations And Development Of A New Metal Matrix Composite For Friction Lining Applications Using Minitab16”,Annual International Conference On Materials Science, Metal & Manufacturing (M3 2011),  Michigan Technological University, December  12-13,2011, Singapore, Pp:13-18, Issn: 2251-1857, Doi:

 

  • Swadesh Kumar Singh1,Dareddy Ramana Reddy2, Amit Kumar Gupta3, “Comparison On Load And Formability Of Low Carbon Steel In Warm And Hydro Mechanical Deep Drawing”, Annual International Conference On Materials Science, Metal & Manufacturing (M3 2011), Michigan Technological University,  December  12-13,2011,Singapore, Pp:111-114, Issn: 2251-1857, Doi:

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, Swadesh Kumar Singh3, “Comparative Evaluation Of Surface Finish (Ra) For Al-SicpMetal Matrix Composite Machining With Diamond Grinding Wheel Using Multiple Regression Analysis And Ann (Matlab)”,  5thInternational Conference On Advances In Mechanical Engineering (Icame-2011), June 06-08, 2011, S.V. National Institute Of Technology, Surat, India, Pp: 586-591

 

  • M V Aditya Nag1,Dareddy Ramana Reddy2, “Performance Improvement Of An Oil Fired Furnace Through Oscillating Combustion Technology”, 3rdinternational Conference On Advances In Energy Research (Icaer2011), December 9-11, 2011, Iitbombay, India.

 

  • Dareddy Ramana Reddy1,Banoth Balunaik2, “ Performance Of Different Grinding Wheels On Machining Of Al-SicpMetal Matrix Composites”,International Conference On Futuristic Trends In Materials & Energy Systems Ftme 2011,  29 – 30 December 2011,  R Siddhartha Engineering College, Vijayawada-520 007, Andhra Pradesh, India, Pp:93-98

 

  • Ramsagar S1, Khazamia Sk2, Roshik N3,Ramana Reddy4, “Modeling For Material Removal Rate In Elastic Emission Machining”, International Conference On Materials Processing And Characterization, Hyderabad, March 2012,  Pp:185-191

 

  • Shazia1, Ravalinuthakki2, Sahithipriya3,Ramana Reddy4, “Construction And Working Of Camless Engines – A Review”, International Conference On Materials Processing And Characterization, Hyderabad, March 2012, Pp: 619-624

 

  • Anjali M1, Priyanka2, Saikrupa3,Ramana Reddy4,“Effect Of Process Parameters In Ice Jet Machining”,  International Conference On Materials Processing And Characterization, March 8-10, 2012, G.R.I.E.T, Hyderabad, March 2012 Pp: 729-733

 

  • Dareddy Ramana Reddy1, M V Aditya Nag2, Banoth Balunaik3, “Effect Of Grit Size And Abrasive Type On Surface Finish Of A Machined Al-SicpMmc”, Second National Conference On Recent Advances In Manufacturing,  September  15-17, 2011, S.V.Nit, Surat, India, Pp:1-6, Isbn: 978-81-8465-762-3

 

  • Dareddy Ramana Reddy1,Banoth Balunaik2, “Optimization Of Process Parameters For Machining Of Al-SicMmc Using Taguchi Design”, National Conference On Advances In Mechanical Engineering(Aim2012), October 11-12, 2012 Vce, Hyderabad, India, Pp: 228-232

 

  • Ashokkumar1, C.Bhaskar Reddy2Ramana Reddy3,“Design And Static Analysis Of Disc Brake With Varying Parameters For Improved Efficiency Using Catia V5r20 And Hypermesh 11”, Proceedings Of The 4th National Conference On Advances In Mechanical Engineering(Aim2013), November 7-8, 2013 Vce, Hyderabad, India, Pp: 90-97, Isbn: 978-93-82570-16-5.

 

  • Computer Aided Modeling And Machining Of A Gas Turbine Blade, C.Srinivas Rao, Sriram Venkatesh, National Conference On Computer Integrated Design And Manufacturing,Nccidm-2001,Coimbatore,India.

 

  • Vibration Analysis Of Laminated Fiber Reinforced Composite Materials, C.Srinivas Rao, Sriram Venkatesh, National Conference On Applicable Mathematics, West Bengal,India,17-19,March2001,Pp43-46.

 

  • Emerging Trends In Internet Telerobotics, C.Srinivas Rao, Sriram Venkatesh, National Conference On Computer Integrated Design And Manufacturing, Nccidm-2001, Coimbatore, India, Pp204.

 

  • Implementing E-Governance: The Hard And Soft Solutions, C.Srinivas Rao, Sriram Venkatesh, Fifteenth Indian Engineering Congress, Hyderabad, India, 18-22 ,Dec 2000,Pp2.1-2.8.

 

  • Product Development Through Concurrent Project Management, C.Srinivas Rao ,12th Isme Conference On Challenges In Product And Process Design And Development In The Information Era, Chennai, India,10-12 Jan 2001.

 

  • Knowledge Management: New Strategic Imperative For Businesses , C.Srinivas Rao, National Seminar On Convergence Of Technologies By 2010,Anna University,Chennai,India,20-22 Jan 2001,Pp120-123.

 

  • Feasibilty Study Of Composite Materials For Gas Turbine Blades, C.Srinivas Rao, Sriram Venkatesh, National Conference On Quality Engineering In Aerospace Technologies, Indian Space Research Organization,23-24 Nov 2001.

 

  • Design Of Pneumatic Part Feeder For Industrial Applications, C.Srinivas Rao, Sriram Venkatesh, Proceedings Of Sixteenth Convention Of Mechanical Engineers, University Of Roorkee,India,2000,Pp200-206.

 

  • Perils Of Qualitative Proliferation, R C.Srinivas Rao, Ingside View, Aug 2005, India.

 

  • Energy Recovery From Urban Municipal And Industrial Waste, C.Srinivas Rao, Sriram Venkatesh, International Conference On Energy Management Beyond 2000,The Institution Of Engineers(I),Lucknow,India,21-Oct 2000,Pp490-498.

 

  • Prospects Of Increased Indigenous Availability Of Non Conventional Energy Sources, C.Srinivas Rao, Sriram Venkatesh, International Conference On Energy Management Beyond 2000,The Institution Of Engineers(I),Lucknow,India,21-Oct,2000,Pp509-515.

 

  • Energy Management: New Horizons, C.Srinivas Rao, National Seminar On Non-Conventional Energy Sources In Community Development ,Annamalai University,Tamilnadu,India,16-17,Feb,2001,Pp1-4.

 

  • Tidal Energy: A Unique Natural Resource, C.Srinivas Rao, Sriram Venkatesh, National Seminar On Non –Conventional Energy Sources In Community Development, Annamalai University,Tamilnadu,India,16-17,Feb,2001,Pp94-99.

 

  • Consolidating Gains Of Biomass, C.Srinivas Rao, Sriram Venkatesh, Seventeenth National Convention Of Mechanical Engineers, 2001, Indore, India.

 

  • Performance Evaluation Of Solar Photovoltaic Systems, C.Srinivas Rao, Sriram Venkatesh, Seventeenth National Convention Of Mechanical Engineers, 2001, Indore, India.

 

  • New Initiatives In Hydro Power Sector, C.Srinivas Rao ,International Conference On Energy Management Beyond 2000,The Institution Of Engineers(I),Lucknow,India,21-Oct2000,Pp305-314.

 

  • Ngo S: Supplementing The Work Of A Welfare State, C.Srinivas Rao, Sixteenth National Convention Of Environmental Engineers, Guwahati, India, 4-5 Nov2000, Pp10-17.

 

  • Industry-Institute Interaction: A Vital Link To Development, C.Srinivas Rao, Sriram Venkatesh, National Conference On University-Industry –R&D Organizations-Scientific Bodies Interaction And Cooperation: Policy Perspectives, Hyderabad, India11-12,Aug2001.
  • Faculty Development ProgramOn “Innovative Teaching Strategies” Organised By The Development Of Business Management, Conducted By Methodist College Of Engineering & Technology, Abids Hyderabad On 21st December 2013

 

  • 2-WeekIste Workshop On “Engineering Thermodynamics” Under The National Mission On Education Through Ict(Mhrd, Govt. Of India) 11thTo 21th 2012 Conducted By Iit Bombay. At Remote Center Mjcet, Banjara Hills Rd. No.-3_Hyderabad

 

  • 2-WeekIste Workshop On “Computational Fluid Dynamics” Under The National Mission On Education Through Ict(Mhrd, Govt. Of India)12th To 22th June, 2012 Conducted By Iit Bombay. At Remote Center Mjcet, Banjara Hills Rd. No.-3_Hyderabad

 

 

  • Course Work On“Research Methodology”, 06th To 11th June 2011. Organised By Research & Development Cell, Sponsored By Jnt University, Kukatpally Hyderabad – 85.

 

  • Qip WorkshopOf Short Term Training Programme On “Time Series Modeling & Spectral Analysis-Theory  & Application”, July 12-17, 2010 Sponsored By Aicte, New Delhi. Organized By The Department Of Chemical Engineering Iit_Madras

 

  • National WorkshopOn “Hydrogen & Fuel Cell Technologies For Future Energy Options”, 22nd & 23rd December 2008. Teqip Sponsored Event, Organized By Centre For Environment, Institute Of Science And Technology, Jawaharlal Nehru Technological University Hyderabad, Held At Ugc-Asc Auditorium Jntu Campus-Hyderabad.

 

 

  • National WorkshopOn “Recent Innovations In Automobile Engineering (Riae-2009)”, 20-22nd March, 2009 Sponsored By Teqip,Nit_Warangal And Organized By Department Of Mechanical Engineering, National Institute Of Technology, Warangal.

 

  • National WorkshopOn “Faculty Development Programme”, December 06-18, 2004 Sponsored By Department Of Science & Technology, Of IndiaNew Delhi. Organized By Entrepreneurship Development Cell, Jawaharlal Nehru Technological University, Hyderabad.

 

  • National WorkshopOf Short Term “English Language Development Programme” 10 April’06 To 01 June’06, Sponsored By Of Andhra Pradesh. Organized By Hsbc Electronic Data Processing_India.

 

  • Forstefiesta’14, A Two Day National Level Technical Symposium On “Internal Combustion Engine”Organised By Dept. Of Mechanical Engineering, Methodist College Of Engineering & Technology On 25th & 26th February 2014.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. Air-Conditioning System _ “Criteria For A Green Building”. Paper Selected At National Conference On Refrigeration And Air Conditioning – Ncrac-2011, 7 – 9thJuly 2011. Organized By Iit – Madras, In Association With Indian Society Of Heating, Refrigeration And Air Conditioning Engineers (Ishrae) And American Society Of Heating, Refrigeration And Air Conditioning Engineers (Ashrae).(Paper Was Selected But Could’t Present On Academic Grounds)

 

  • Madhu Maheswara Reddy, Attended A One Day Faculty Development Program On “Effective Teaching Methodologies” At Institute Of Public Enterprise.

 

  • V.Prasad, Presented A Paper Titled “Mechanical Evaluation With Fe Analysis Of Sandwich Panels For Wind Turbine Blade” In Wemep-2012(Indo Danish Int Conf) At Bits-Pilani Hyd Campus On 22 & 23 Nov’12.

 

  • Madhu Maheswara Reddy, Attended 2 Week Iste Workshop On Engineering Mechanics Under The National Mission On Education Through Ict Conducted By Iit Bombay In December 2013.

 

  • Madhu Maheswara Reddy, Attended Ieee – International Conference On Advances In Engineering And Technology-(Icaet 2014) And Published A Technical Paper Titled “Design, Simulation And Analysis Of Automatic Multifastener Device” Isbn No.:978-1-4799-4949-6@2014 Ieee.

 

  • Ramana Reddy, Participated In A Two Week Iste Workshop On “Engineering Thermodynamics” Conducted By Iit Bombay (Mhrd) From 11thTo 21stDecember 2012.

 

  • Ramana Reddy Organized A Two Weeks Faculty Development Program On “Characterization Of Materials And Processing Of High Strength Materials”, Department Of Mechanical Engineering, Gokaraju Rangaraju Institute Of Engineering And Technology, Hyderabad From 25thJune To 6thjuly 2013.(Co-Coordinator)

 

  • Ramana Reddy Participated In One Week Short Term Training Program (Sttp) On “Mechatronics” Organized By The Institution Of Engineers(India), Ap State Centre, Hyderabad From 16th-20th June 2008.

 

  • Ramana Reddy Organizing Secretary For International Conference On Materials Processing And Characterization Icmpc 2014, Griet, Hyd.

 

  • Ramana Reddy Convener For International Conference On Materials Processing And Characterization Icmpc 2013, Griet, Hyd.

 

  • Ramana Reddy Convener For International Conference On Materials Processing And Characterization Icmpc 2012, Griet, Hyd.

 

  • Ramana Reddy Associate Editor For International Journal Of Advanced Materials Manufacturing& Characterization (Ijammc) From 2012, Issn: 2347-1891.

 

  • Ramana Reddy Worked As Guest Faculty In Me (Cad/Cam) For Subjects Design For Manufacture And Automation

 

  • Ramana Reddy Participated In One Day Workshop On “Enforcement Of Intellectual Property Rights In Indian Scenario”, Department Of Mechanical Engineering, Griet, Hyderabad On 25thFebruary 2012.

 

  • Ramana Reddy Participated A Two Day International Workshop On “Composites Design & Analysis Using Fem” Conducted By Department Of Mechanical Engineering, Madanapalle Institute Of Technology & Science, Madanapalle, India On 21stAnd 22nddecember 2012.

 

  • Ramana Reddy Participated In A Three Day Faculty Development Program On “Welding Processes And Practices For Skill Improvement In Fabrication”, Department Of Mechanical Engineering, Griet, Hyderabad From 21stTo 23rdFebruary 2013.

 

  • Ramana Reddy Participated In A Three Day Faculty Development Program On “Advanced Machining Techniques”, Department Of Mechanical Engineering, Griet, Hyderabad From 16thTo 18thjanuary 2013.

 

  • Ramana Reddy One Day Faculty Development Program On “Innovative Teaching Strategies” Organized By Department Of Business Management, Methodist College Of Engineering & Technology, Hyderabad On 21stDec 2013.

 

  • Ramana Reddy Organized A Two Day National Level Technical Symposium Forstefiesta 2014 In Department Of Mechanical Engineering, Methodist College Of Engineering & Technology, And Hyderabad On 25th-26thFebruary 2014 (Co-Coordinator).

 

  • Ramana Reddy Three Day Workshop On “Naac & Nba Accreditation Process” Organized By Indur Institute Of Engineering & Technology, Siddipet, – Medak From 5th-7thMay 2015.

 

  • Ramana Reddy One Day Workshop On “Industry-Institute And Defence Labs Interaction In Collaboration With Programme Ad, Rci & Drdo” Organized By Department Of Mechanical Engineering, University College Of Engineering (Autonomous), Osmania University, Hyderabad On 30thAugust 2014.

 

  • Ramana Reddy Delivered Lecture In Refresher Course On “Engineering Mechanics”.
  • Ramana Reddy Organized One Day Industrial Visit To M/S Nagasai Industries, Idpl, Hyderabad, Choice Preci- Tech Pvt. Ltd., Medchal, As A Part Of Refresher Course ( I B.E Mcet Students) On 2ndseptember 2014.

 

  • Srinivasa Raghavan, Published A Paper Titled “Effect Of Induced Turbulence In A C.I. Engine By Varying Compression Ratio And Injection Timing On The Performance Of The Engine”, International Journal Of Engineering Research And Technology(Ijert), Volume 3, Issue 8, August 2014, Issn: 2278-0181, Impact Factor : 1.76.
  • Ramana Reddy Received “Gold Medal” In Gate-2004 For Securing 6th Rank (India Level) From Ace Engineering Academy, Hyderabad.

 

  • Ramana Reddy Received “National Educational Leadership Award” For Outstanding Contribution & Lifetime Achievement   From Economic Growth Society Of India, New Delhi On The Occasion Of National Seminar At New Delhi On 25thAugust 2013.

 

  • Ramana Reddy Received “Letter Of Appreciation” From Griet, Hyderabad For 100% Results In Iv B.Tech Ii Sem Subject -Unconventional Machining Processes In Academic Year 2008-2009.

 

  • Ramana Reddy Received “Letter Of Appreciation” From Griet, Hyderabad For 100% Results In M.Tech I Sem Subject –Special Manufacturing Processes In Academic Year 2009-2010.

 

  • Ramana Reddy  Received “Letter Of Appreciation” From Griet, Hyderabad For 100% Results In M.Tech I Sem Subject –Special Manufacturing Processes In Academic Year 2012-2013

 

  • Ramana Reddy Received “Letter Of Appreciation” From Griet, Hyderabad For 100% Results In M.Tech I Sem Subject –Design For Manufacture And Assembly In Academic Year 2012-2013.
+ Research Activity Mechanical
  • Students Are Encouraged To Make Working Prototypes For Their Projects In Final Year. Recently Made Prototypes Include Suitcase Car, Pressurized Air Scooter, Open Type Four Wheeler, Solar Power Based Products.

 

  • Students & Faculty Are Encouraged To Take-Up Research Projects From Industries & Other Organizations.

 

  • Students & Faculty Regularly Publish Technical Papers In Journals & Participate In National/International Conferences.
+ Paper Publications
  • Usv Prasad, K. Madhu Murthy And G. Amba Prasad Rao Published A Paper Titled “Effective Utilization Of B20 Blend With Oxygenated Additives Thermal Science”, Year 2011, Vol. 15, No. 4, Pp. 1175-1184.

 

  • V. Prasad, K. Madhu Murthy And G. Amba Prasad Rao Published A Paper Titled “Nox Reduction Strategies For A B40 Fuelled Direct Injection Diesel Engine” International Journal Of Mechanical Engineering January-June 2012 • Volume 5 • Issue 1.

 

  • Vara Prasad, K. Madhu Murthy, G. Amba Prasad Rao Published A Paper Titled “Effective Reduction Of Emissions Of A Di Diesel Engine Fuelled With Biodiesel And Diesel Blends With Oxygenated Additives” Journal Of Alternate Energy Sources & Technologies, Stm Journals Volume 3, Issue 2, August 2012, Pages 1-10.

 

  • Amba Prasad Rao, K.Madhu Murthy And Usv Prasad “Influence Of Fuel Injection Parameters Of Di Diesel Engine Fuelled With Biodiesel And Diesel Blends” International Conference On Mechanical, Automobile And Robotics Engineering (Icmar 2011) Penang,Malaysia, 11-12 Feb.2012.

 

  • Amba Prasad Rao, K.Madhu Murthy And Usv Prasad “Effect Of Oxygenated Additives On Control Of Emissions In A Di Diesel Engine Using Biodiesel-Diesel Blends” International Conference On Computer, Electrical, Electronics & Mechanical Engineering (Iceeme’2012) Penang, Malaysia, 11-12 Feb.2012

 

  • Usv Prasad, K. Madhu Murthy And G. Amba Prasad Rao “Effect Of Ethanol And Diethyl Ether As Additives For Improving Performance Of Engine With Biodiesel -Diesel Blends” Proceedings Of International Conference On Advances In Energyresearch (Icaer 2011), Iit Mumbai.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. “Decentralize Energy System For Rural India – A Future Option”. International Journal Of Integrated Energy Systems (Ijies),Issn: 0975-2978, Volume 1 Number 2, Pp 153-162, July-December 2009.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Pradeep Kumar “Modified Ci Engine Performance By Varying Injection Timing”. International    Journal For Trends In Engineering & Technology (Ijtet),Issn: 2349-9303. Paper Selected.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Soma Kumari “Air Conditioning System_Criteria For Green Building”. International Conference On Recent Advances In Mechanical Engineering_Incrame’12. 19th& 20th April 2012 At Dr. Mgr Educational & Research Institute University, Adayalampattu, Chennai Tamil Nadu.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Srinivas Raghavan “Performance Of Ci Engine With & Without Swirl In Crown Of The Piston With Varying Injection Pressure & Timing”. An International Conference & Exhibition On Cutting Edge Technological Challenges In Mechanical Engineering_Cetcme-2015. In Association With Iste, Delhi And Uptu, Lucknow On 21st& 22nd March 2015, Organized By The Department Of Mechanical Engineering, Noida Institute Of Engineering And Technology, Greater Noida.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M, Pradeep Kumar “Modified Ci Engine Performance By Varying Injection Timing”. International Conference On Advance Research In Technology And Engineering – Icarte’15 Held At Ranganthar Institute Of Engineering & Technology On 31-03-2015.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. “Decentralize Energy System For Rural India _A Future Option”. National Conference On “Energy Security For Rural Development – Esrd 2009”, 26thMarch 2009. Sponsored By Ministry Of New And Renewable Energy (Mnre) Of India & University Grand Commission (Ugc). Organized By Rural Energy Centre Gandhigram Rural Institute – Deemed University, Gandhigram, Dindigul 624 302, Tamilnadu.

 

  • Fakhruddin Hasan Nizami “Hydrogen Generation” Two Days National Conference, Sanketika 2k11, 17th& 18th March 2011. Organized By Lords Institute Of Engineering & Technology, Iso: 9001-2008 Certified, Himayathsagar, Hyderabad-500008.

 

  • V. Prasad Has Published A Paper Titled “Lagrangian Model For Simulating Turbulent Dispersion And Agglomeration Of Droplets Within A Spray” In International Journal Of Advanced Technology In Engineering And Science (Issn 2348-7550), Volume 02, Issue 11, And November 2014.

 

  • V.Prasad, Published A Paper Titled – “Evaluation Of Mechanical Properties Of Coconut Coir/Bamboo Fibre Reinforced Polymer Matrix Composites” In Ijmmse (Issn2278-2524) Ref: Ijmmse.

 

  • R.V.Prasad, Published A Paper Titled “Fsw Of Ppl Reinforced With Nanosized Composites, Effects On Mech&Microstructural Properties” In Ijera.

 

  • R.V.Prasad, Published A Paper Titled On “Microstructure& Mech Properties Of Friction Stir Welded Dissimilar Aluminium Alloys” In Ijsrp (Iosr Jmce) Issn 2253153 Vol 2.

 

  • R.V.Prasad, Published A Paper Titled “Experimental Investigation Of Drilling Parameters On Composite Material” In Ijsrp Journal Issn2278-1684 Vol2 Issue3.

 

  • Madhu Maheswara Reddy, Published A Paper Titled “Heat Transfer Analysis Of Automotive Disc Brakes” In International Journal Of Advance Research In Science & Engineering, Vol. No.3, Issue No.9, And Issn-2319-8354(E).

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, “Development Of A Composite Material From Agro Waste For Wear Resistance Application”, Materials Science Forum Vols. 773-774 (2014) Pp 319-324, Trans Tech Publications, Switzerland,Doi:10.4028/Net/Msf.773-774.319.

 

  • Deepika1, C. Bhaskar Reddy2 Ramana Reddy3, “Fabrication And Performance Evaluation Of A Composite Material For Wear Resistance Application”, International Journal Of Engineering Science And Innovative Technology (Ijesit), Volume 2, Issue 6, Nov 2013, Pp: 66-71 Issn: 2319-5967. Impact Factor:1.753

 

  • Dareddy Ramana Reddy1, Swadesh Kumar Singh2, B.Balunaik3, “Ingredients Composition Formulations And Development Of A New Metal Matrix Composite For Friction Lining Applications Using Minitab16”, International Journal Of Engineering And Technology, Publishers Gstf, Singapore, Volume 1, Number 1, June 2012 Pp: 99-104, Issn: 2251-3701. Doi : 10.5176/2251-3701_1.1.17

 

  • Bhaskar Reddy1, C.Eswara Reddy2Dareddy Ramana Reddy3,“Experimental Investigation Of Surface Finish And Material Removal Rate Of P20 Die-Tool Steel In Wire-Edm Using Multiple Regression Analysis”, International Journal Of Engineering And Technology, Publishers Gstf, Singapore, Volume 1, Number 1, June2012, Pp: 113-118, Issn: 2251-3701.  Doi : 10.5176/2251-3701_1.1.19

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, “Effect Of Grit Size And Abrasive Type On Surface Finish Of A Machined Al-SicpMmc”, International Journal Of Manufacturing Engineering, Sme Publications, Volume 7, Issue 2, June 2012,   Pp 67-71, Issn: 0973-6867. Impact Factor: 1.071

 

  • Aditya Nag1Dareddy Ramana Reddy2,“Performance Improvement Of An Oil Fired Furnace Through Oscillating Combustion Technology”,International Journal Of Scientific Essays And Research (Ijser), Usa, Volume3, Issue 7, 2012issn: 2229-5518, Research Publication ( Global Institute For Scientific Information (Gisi),  Impact Factor:0.629

 

  • Dareddy Ramana Reddy1, Swadesh Kumar Singh2, B.Balunaik3“Development Of Bio-Degradable Friction Material For Brake Pads From Palm Kernel Shell”, International Journal Of Mechanical Engineering And Materials Sciences Vol. 4, Number 1, Pp 1–6, Issn: 0974-584x, Impact Factor 36

 

  • Dareddy Ramana Reddy1, B.Balu Naik2, T. Kishen Kumar Reddy3, “Prediction Of Surface Roughness In Machining Of Homogenized SicpReinforced Aluminium Metal Matrix Composites Using Multiple Regression Analysis”  International Journal Of Manufacturing Science And Technology Vol. 4, Number 2, Pp  81–91. Dec2010, Issn: 0973-5496.Impact Factor 0.28

 

  • Ramana Reddy Dareddy1, M.V. Aditya Nag2, M.S.N. Gupta3, “Stress And Deformation Analysis Of Aircraft’s Fuel Tank Under Different Inertia Load Cases In Addition To A Static Test Pressure Using Fea”, Proceedings Of The International Conference On Advances In Manufacturing And Materials Engineering, 23-25 September 2014, Kuala Lumpur Malaysia.

 

  • Moses R Krupavaram1,Ramana Reddy2, M.Amaresh Reddy3, “Review On Bio Machining Of Copper”, Proceedings Of The International Mechanical Engineering Congress (Imec 2014): June 13-15, 2014, Nit – Trichy, Pp: 14-17, Isbn 978-93-84389-01-7

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, Swadesh Kumar Singh3,“Development Of A Composite Material From Agro Waste For Wear Resistance Application”, 15th International Conference On Advances In Materials & Processing Technologies (Ampt2012), September 22-26,2012, University Of Wollongong, Australia. Paper Id:Pnam-12007

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, Swadesh Kumar Singh3, “Ingredients Composition Formulations And Development Of A New Metal Matrix Composite For Friction Lining Applications Using Minitab16”,Annual International Conference On Materials Science, Metal & Manufacturing (M3 2011),  Michigan Technological University, December  12-13,2011, Singapore, Pp:13-18, Issn: 2251-1857, Doi:

 

  • Swadesh Kumar Singh1,Dareddy Ramana Reddy2, Amit Kumar Gupta3, “Comparison On Load And Formability Of Low Carbon Steel In Warm And Hydro Mechanical Deep Drawing”, Annual International Conference On Materials Science, Metal & Manufacturing (M3 2011), Michigan Technological University,  December  12-13,2011,Singapore, Pp:111-114, Issn: 2251-1857, Doi:

 

  • Dareddy Ramana Reddy1, Banoth Balunaik2, Swadesh Kumar Singh3, “Comparative Evaluation Of Surface Finish (Ra) For Al-SicpMetal Matrix Composite Machining With Diamond Grinding Wheel Using Multiple Regression Analysis And Ann (Matlab)”,  5thInternational Conference On Advances In Mechanical Engineering (Icame-2011), June 06-08, 2011, S.V. National Institute Of Technology, Surat, India, Pp: 586-591

 

  • M V Aditya Nag1,Dareddy Ramana Reddy2, “Performance Improvement Of An Oil Fired Furnace Through Oscillating Combustion Technology”, 3rdinternational Conference On Advances In Energy Research (Icaer2011), December 9-11, 2011, Iitbombay, India.

 

  • Dareddy Ramana Reddy1,Banoth Balunaik2, “ Performance Of Different Grinding Wheels On Machining Of Al-SicpMetal Matrix Composites”,International Conference On Futuristic Trends In Materials & Energy Systems Ftme 2011,  29 – 30 December 2011,  R Siddhartha Engineering College, Vijayawada-520 007, Andhra Pradesh, India, Pp:93-98

 

  • Ramsagar S1, Khazamia Sk2, Roshik N3,Ramana Reddy4, “Modeling For Material Removal Rate In Elastic Emission Machining”, International Conference On Materials Processing And Characterization, Hyderabad, March 2012,  Pp:185-191

 

  • Shazia1, Ravalinuthakki2, Sahithipriya3,Ramana Reddy4, “Construction And Working Of Camless Engines – A Review”, International Conference On Materials Processing And Characterization, Hyderabad, March 2012, Pp: 619-624

 

  • Anjali M1, Priyanka2, Saikrupa3,Ramana Reddy4,“Effect Of Process Parameters In Ice Jet Machining”,  International Conference On Materials Processing And Characterization, March 8-10, 2012, G.R.I.E.T, Hyderabad, March 2012 Pp: 729-733

 

  • Dareddy Ramana Reddy1, M V Aditya Nag2, Banoth Balunaik3, “Effect Of Grit Size And Abrasive Type On Surface Finish Of A Machined Al-SicpMmc”, Second National Conference On Recent Advances In Manufacturing,  September  15-17, 2011, S.V.Nit, Surat, India, Pp:1-6, Isbn: 978-81-8465-762-3

 

  • Dareddy Ramana Reddy1,Banoth Balunaik2, “Optimization Of Process Parameters For Machining Of Al-SicMmc Using Taguchi Design”, National Conference On Advances In Mechanical Engineering(Aim2012), October 11-12, 2012 Vce, Hyderabad, India, Pp: 228-232

 

  • Ashokkumar1, C.Bhaskar Reddy2Ramana Reddy3,“Design And Static Analysis Of Disc Brake With Varying Parameters For Improved Efficiency Using Catia V5r20 And Hypermesh 11”, Proceedings Of The 4th National Conference On Advances In Mechanical Engineering(Aim2013), November 7-8, 2013 Vce, Hyderabad, India, Pp: 90-97, Isbn: 978-93-82570-16-5.

 

  • Computer Aided Modeling And Machining Of A Gas Turbine Blade, C.Srinivas Rao, Sriram Venkatesh, National Conference On Computer Integrated Design And Manufacturing,Nccidm-2001,Coimbatore,India.

 

  • Vibration Analysis Of Laminated Fiber Reinforced Composite Materials, C.Srinivas Rao, Sriram Venkatesh, National Conference On Applicable Mathematics, West Bengal,India,17-19,March2001,Pp43-46.

 

  • Emerging Trends In Internet Telerobotics, C.Srinivas Rao, Sriram Venkatesh, National Conference On Computer Integrated Design And Manufacturing, Nccidm-2001, Coimbatore, India, Pp204.

 

  • Implementing E-Governance: The Hard And Soft Solutions, C.Srinivas Rao, Sriram Venkatesh, Fifteenth Indian Engineering Congress, Hyderabad, India, 18-22 ,Dec 2000,Pp2.1-2.8.

 

  • Product Development Through Concurrent Project Management, C.Srinivas Rao ,12th Isme Conference On Challenges In Product And Process Design And Development In The Information Era, Chennai, India,10-12 Jan 2001.

 

  • Knowledge Management: New Strategic Imperative For Businesses , C.Srinivas Rao, National Seminar On Convergence Of Technologies By 2010,Anna University,Chennai,India,20-22 Jan 2001,Pp120-123.

 

  • Feasibilty Study Of Composite Materials For Gas Turbine Blades, C.Srinivas Rao, Sriram Venkatesh, National Conference On Quality Engineering In Aerospace Technologies, Indian Space Research Organization,23-24 Nov 2001.

 

  • Design Of Pneumatic Part Feeder For Industrial Applications, C.Srinivas Rao, Sriram Venkatesh, Proceedings Of Sixteenth Convention Of Mechanical Engineers, University Of Roorkee,India,2000,Pp200-206.

 

  • Perils Of Qualitative Proliferation, R C.Srinivas Rao, Ingside View, Aug 2005, India.

 

  • Energy Recovery From Urban Municipal And Industrial Waste, C.Srinivas Rao, Sriram Venkatesh, International Conference On Energy Management Beyond 2000,The Institution Of Engineers(I),Lucknow,India,21-Oct 2000,Pp490-498.

 

  • Prospects Of Increased Indigenous Availability Of Non Conventional Energy Sources, C.Srinivas Rao, Sriram Venkatesh, International Conference On Energy Management Beyond 2000,The Institution Of Engineers(I),Lucknow,India,21-Oct,2000,Pp509-515.

 

  • Energy Management: New Horizons, C.Srinivas Rao, National Seminar On Non-Conventional Energy Sources In Community Development ,Annamalai University,Tamilnadu,India,16-17,Feb,2001,Pp1-4.

 

  • Tidal Energy: A Unique Natural Resource, C.Srinivas Rao, Sriram Venkatesh, National Seminar On Non –Conventional Energy Sources In Community Development, Annamalai University,Tamilnadu,India,16-17,Feb,2001,Pp94-99.

 

  • Consolidating Gains Of Biomass, C.Srinivas Rao, Sriram Venkatesh, Seventeenth National Convention Of Mechanical Engineers, 2001, Indore, India.

 

  • Performance Evaluation Of Solar Photovoltaic Systems, C.Srinivas Rao, Sriram Venkatesh, Seventeenth National Convention Of Mechanical Engineers, 2001, Indore, India.

 

  • New Initiatives In Hydro Power Sector, C.Srinivas Rao ,International Conference On Energy Management Beyond 2000,The Institution Of Engineers(I),Lucknow,India,21-Oct2000,Pp305-314.

 

  • Ngo S: Supplementing The Work Of A Welfare State, C.Srinivas Rao, Sixteenth National Convention Of Environmental Engineers, Guwahati, India, 4-5 Nov2000, Pp10-17.

 

  • Industry-Institute Interaction: A Vital Link To Development, C.Srinivas Rao, Sriram Venkatesh, National Conference On University-Industry –R&D Organizations-Scientific Bodies Interaction And Cooperation: Policy Perspectives, Hyderabad, India11-12,Aug2001.
+ Conference / Workshops
  • Faculty Development ProgramOn “Innovative Teaching Strategies” Organised By The Development Of Business Management, Conducted By Methodist College Of Engineering & Technology, Abids Hyderabad On 21st December 2013

 

  • 2-WeekIste Workshop On “Engineering Thermodynamics” Under The National Mission On Education Through Ict(Mhrd, Govt. Of India) 11thTo 21th 2012 Conducted By Iit Bombay. At Remote Center Mjcet, Banjara Hills Rd. No.-3_Hyderabad

 

  • 2-WeekIste Workshop On “Computational Fluid Dynamics” Under The National Mission On Education Through Ict(Mhrd, Govt. Of India)12th To 22th June, 2012 Conducted By Iit Bombay. At Remote Center Mjcet, Banjara Hills Rd. No.-3_Hyderabad

 

 

  • Course Work On“Research Methodology”, 06th To 11th June 2011. Organised By Research & Development Cell, Sponsored By Jnt University, Kukatpally Hyderabad – 85.

 

  • Qip WorkshopOf Short Term Training Programme On “Time Series Modeling & Spectral Analysis-Theory  & Application”, July 12-17, 2010 Sponsored By Aicte, New Delhi. Organized By The Department Of Chemical Engineering Iit_Madras

 

  • National WorkshopOn “Hydrogen & Fuel Cell Technologies For Future Energy Options”, 22nd & 23rd December 2008. Teqip Sponsored Event, Organized By Centre For Environment, Institute Of Science And Technology, Jawaharlal Nehru Technological University Hyderabad, Held At Ugc-Asc Auditorium Jntu Campus-Hyderabad.

 

 

  • National WorkshopOn “Recent Innovations In Automobile Engineering (Riae-2009)”, 20-22nd March, 2009 Sponsored By Teqip,Nit_Warangal And Organized By Department Of Mechanical Engineering, National Institute Of Technology, Warangal.

 

  • National WorkshopOn “Faculty Development Programme”, December 06-18, 2004 Sponsored By Department Of Science & Technology, Of IndiaNew Delhi. Organized By Entrepreneurship Development Cell, Jawaharlal Nehru Technological University, Hyderabad.

 

  • National WorkshopOf Short Term “English Language Development Programme” 10 April’06 To 01 June’06, Sponsored By Of Andhra Pradesh. Organized By Hsbc Electronic Data Processing_India.

 

  • Forstefiesta’14, A Two Day National Level Technical Symposium On “Internal Combustion Engine”Organised By Dept. Of Mechanical Engineering, Methodist College Of Engineering & Technology On 25th & 26th February 2014.

 

  • Fakhruddin Hasan Nizami, M.Y. Ali, Manzoor Hussain M. Air-Conditioning System _ “Criteria For A Green Building”. Paper Selected At National Conference On Refrigeration And Air Conditioning – Ncrac-2011, 7 – 9thJuly 2011. Organized By Iit – Madras, In Association With Indian Society Of Heating, Refrigeration And Air Conditioning Engineers (Ishrae) And American Society Of Heating, Refrigeration And Air Conditioning Engineers (Ashrae).(Paper Was Selected But Could’t Present On Academic Grounds)

 

  • Madhu Maheswara Reddy, Attended A One Day Faculty Development Program On “Effective Teaching Methodologies” At Institute Of Public Enterprise.

 

  • V.Prasad, Presented A Paper Titled “Mechanical Evaluation With Fe Analysis Of Sandwich Panels For Wind Turbine Blade” In Wemep-2012(Indo Danish Int Conf) At Bits-Pilani Hyd Campus On 22 & 23 Nov’12.

 

  • Madhu Maheswara Reddy, Attended 2 Week Iste Workshop On Engineering Mechanics Under The National Mission On Education Through Ict Conducted By Iit Bombay In December 2013.

 

  • Madhu Maheswara Reddy, Attended Ieee – International Conference On Advances In Engineering And Technology-(Icaet 2014) And Published A Technical Paper Titled “Design, Simulation And Analysis Of Automatic Multifastener Device” Isbn No.:978-1-4799-4949-6@2014 Ieee.

 

  • Ramana Reddy, Participated In A Two Week Iste Workshop On “Engineering Thermodynamics” Conducted By Iit Bombay (Mhrd) From 11thTo 21stDecember 2012.

 

  • Ramana Reddy Organized A Two Weeks Faculty Development Program On “Characterization Of Materials And Processing Of High Strength Materials”, Department Of Mechanical Engineering, Gokaraju Rangaraju Institute Of Engineering And Technology, Hyderabad From 25thJune To 6thjuly 2013.(Co-Coordinator)

 

  • Ramana Reddy Participated In One Week Short Term Training Program (Sttp) On “Mechatronics” Organized By The Institution Of Engineers(India), Ap State Centre, Hyderabad From 16th-20th June 2008.

 

  • Ramana Reddy Organizing Secretary For International Conference On Materials Processing And Characterization Icmpc 2014, Griet, Hyd.

 

  • Ramana Reddy Convener For International Conference On Materials Processing And Characterization Icmpc 2013, Griet, Hyd.

 

  • Ramana Reddy Convener For International Conference On Materials Processing And Characterization Icmpc 2012, Griet, Hyd.

 

  • Ramana Reddy Associate Editor For International Journal Of Advanced Materials Manufacturing& Characterization (Ijammc) From 2012, Issn: 2347-1891.

 

  • Ramana Reddy Worked As Guest Faculty In Me (Cad/Cam) For Subjects Design For Manufacture And Automation

 

  • Ramana Reddy Participated In One Day Workshop On “Enforcement Of Intellectual Property Rights In Indian Scenario”, Department Of Mechanical Engineering, Griet, Hyderabad On 25thFebruary 2012.

 

  • Ramana Reddy Participated A Two Day International Workshop On “Composites Design & Analysis Using Fem” Conducted By Department Of Mechanical Engineering, Madanapalle Institute Of Technology & Science, Madanapalle, India On 21stAnd 22nddecember 2012.

 

  • Ramana Reddy Participated In A Three Day Faculty Development Program On “Welding Processes And Practices For Skill Improvement In Fabrication”, Department Of Mechanical Engineering, Griet, Hyderabad From 21stTo 23rdFebruary 2013.

 

  • Ramana Reddy Participated In A Three Day Faculty Development Program On “Advanced Machining Techniques”, Department Of Mechanical Engineering, Griet, Hyderabad From 16thTo 18thjanuary 2013.

 

  • Ramana Reddy One Day Faculty Development Program On “Innovative Teaching Strategies” Organized By Department Of Business Management, Methodist College Of Engineering & Technology, Hyderabad On 21stDec 2013.

 

  • Ramana Reddy Organized A Two Day National Level Technical Symposium Forstefiesta 2014 In Department Of Mechanical Engineering, Methodist College Of Engineering & Technology, And Hyderabad On 25th-26thFebruary 2014 (Co-Coordinator).

 

  • Ramana Reddy Three Day Workshop On “Naac & Nba Accreditation Process” Organized By Indur Institute Of Engineering & Technology, Siddipet, – Medak From 5th-7thMay 2015.

 

  • Ramana Reddy One Day Workshop On “Industry-Institute And Defence Labs Interaction In Collaboration With Programme Ad, Rci & Drdo” Organized By Department Of Mechanical Engineering, University College Of Engineering (Autonomous), Osmania University, Hyderabad On 30thAugust 2014.

 

  • Ramana Reddy Delivered Lecture In Refresher Course On “Engineering Mechanics”.
  • Ramana Reddy Organized One Day Industrial Visit To M/S Nagasai Industries, Idpl, Hyderabad, Choice Preci- Tech Pvt. Ltd., Medchal, As A Part Of Refresher Course ( I B.E Mcet Students) On 2ndseptember 2014.

 

  • Srinivasa Raghavan, Published A Paper Titled “Effect Of Induced Turbulence In A C.I. Engine By Varying Compression Ratio And Injection Timing On The Performance Of The Engine”, International Journal Of Engineering Research And Technology(Ijert), Volume 3, Issue 8, August 2014, Issn: 2278-0181, Impact Factor : 1.76.
+ Faculty Excellence
  • Ramana Reddy Received “Gold Medal” In Gate-2004 For Securing 6th Rank (India Level) From Ace Engineering Academy, Hyderabad.

 

  • Ramana Reddy Received “National Educational Leadership Award” For Outstanding Contribution & Lifetime Achievement   From Economic Growth Society Of India, New Delhi On The Occasion Of National Seminar At New Delhi On 25thAugust 2013.

 

  • Ramana Reddy Received “Letter Of Appreciation” From Griet, Hyderabad For 100% Results In Iv B.Tech Ii Sem Subject -Unconventional Machining Processes In Academic Year 2008-2009.

 

  • Ramana Reddy Received “Letter Of Appreciation” From Griet, Hyderabad For 100% Results In M.Tech I Sem Subject –Special Manufacturing Processes In Academic Year 2009-2010.

 

  • Ramana Reddy  Received “Letter Of Appreciation” From Griet, Hyderabad For 100% Results In M.Tech I Sem Subject –Special Manufacturing Processes In Academic Year 2012-2013

 

  • Ramana Reddy Received “Letter Of Appreciation” From Griet, Hyderabad For 100% Results In M.Tech I Sem Subject –Design For Manufacture And Assembly In Academic Year 2012-2013.

ECE DEPARTMENT

Research activities in ECE Department

  • Mr I Srikanth & Mr. T Sravan Kumar, Asst Profs. Presented Paper At Iccct 2014, Organized By Cse-Ou, Titled ‘Multilevel Huffman Test Data Compression With Multiplier Scan Chain Method’ Held On 11,12, & 13th DEC 2014

 

  • Ms A Vinisha, Asst. Prof In Ece Published Paper In Iosr Journal Of Electronics & Comm. Engg, Titled ’ An Efficient Algorithm For Improving Ber & Papr Of Ofdm By Using Non Linear Companding Transform’ , Vol 8, Sep-Oct 2014.

 

  • Mr I Srikanth & Mr. T Sravan Kumar, Asst Profs. Presented Paper At EESCO 2015, At At VIGNAN Inst. Of Engg & Tech, Vizag, Titled ‘Realisation Of Fir Using Highspeed Low Power Floating Point Arithmetic Unit’ Held On 24 & 25 JAN 2015

 

  • Mr M Jagan Mohan Rao , Assoc. Prof. Presented Paper At Eesco 2015, At Vignan Inst. Of Engg & Tech, Vizag, Titled ‘Generation Of 48 Pulses For 3 To 9 Converters’ Held On 24 & ,25 Jan 2015

 

  • Mr S Prabhakar Rao, Assoc.Prof. Presented Paper At A-Blaze 2015, At Amity University,Greater Noida,Up , Titled ‘Mqam-Ofdma Interface Analysis Based On Asynchronous-Time In Ad-Hoc Networks’ Held On 25 ,26,,27 Feb 2015
+ ECE Department Research

Research activities in ECE Department

  • Mr I Srikanth & Mr. T Sravan Kumar, Asst Profs. Presented Paper At Iccct 2014, Organized By Cse-Ou, Titled ‘Multilevel Huffman Test Data Compression With Multiplier Scan Chain Method’ Held On 11,12, & 13th DEC 2014

 

  • Ms A Vinisha, Asst. Prof In Ece Published Paper In Iosr Journal Of Electronics & Comm. Engg, Titled ’ An Efficient Algorithm For Improving Ber & Papr Of Ofdm By Using Non Linear Companding Transform’ , Vol 8, Sep-Oct 2014.

 

  • Mr I Srikanth & Mr. T Sravan Kumar, Asst Profs. Presented Paper At EESCO 2015, At At VIGNAN Inst. Of Engg & Tech, Vizag, Titled ‘Realisation Of Fir Using Highspeed Low Power Floating Point Arithmetic Unit’ Held On 24 & 25 JAN 2015

 

  • Mr M Jagan Mohan Rao , Assoc. Prof. Presented Paper At Eesco 2015, At Vignan Inst. Of Engg & Tech, Vizag, Titled ‘Generation Of 48 Pulses For 3 To 9 Converters’ Held On 24 & ,25 Jan 2015

 

  • Mr S Prabhakar Rao, Assoc.Prof. Presented Paper At A-Blaze 2015, At Amity University,Greater Noida,Up , Titled ‘Mqam-Ofdma Interface Analysis Based On Asynchronous-Time In Ad-Hoc Networks’ Held On 25 ,26,,27 Feb 2015